Abstract:CO 2 methanation involves the utilization of renewable hydrogen, greenhouse gases CO 2 as raw materials to transform them into clean energy sources in the form of methane. This procedure is of great significance for conserving energy and reducing emissions. In this study, a series of Ni/ZSM-5 catalysts with different Si/Al ratios were prepared. H 2 -TPR and XPS were employed to explore the influence of Al content on the properties of the Ni species. The adsorption properties of the reactants on the different Ni/ZSM-5 catalysts were investigated by CO 2 -TPD and H 2 -TPD. Moreover, as H 2 O is produced during the reaction, contact angle measurement were conducted to investigate the hydrophilicity and hydrophobicity of the samples. It is suggested that the ZSM-5 Si/Al ratio (or Al content) affected both Ni dispersion and catalyst hydrophilicity. The higher Al content in ZSM-5 improved Ni dispersion. However, high hydrophilicity is unfavorable for product removal, leading to poor catalytic performance. As a result, the Ni/ZSM-5 (41) sample with appropriate Si/Al exhibited good catalytic performance with CO 2 conversion of 64 % and CH 4 selectivity of >98 % at 350 °C. The CO 2 conversion and CH 4 selectivity remained at the initial level after reaction for 72 h. This indicates that the Ni/ZSM-5 (41) catalyst has excellent stability. Based on the characterization after the reaction, it can be observed that the catalyst exhibits good carbon deposition resistance and stability. Therefore, the choice of zeolite acid amount is crucial for the reaction performance. This study will provide guideline for the development of high-performance catalysts for CO 2 methanation-loaded Ni.

Effect of NiO on the Catalytic Performance of Au/TiO_2 Catalyst for Hydrogen Production from Methanol Steam Reforming

Effect of La2O3 Promoter on the Performance of Au/TiO2 Catalyst for Selective Hydrogenation of Cinnamaldehyde

Studies on Au/TiO2 Catalyst for Hydrogen Production from Methanol Steam Reforming

Au-NiO/TiO_2 Catalyst for Methanol Autothermal Reforming to Produce Hydrogen

Production of Hydrogen Via Autothermal Reforming and Steam Reforming of Methanol on Au-NiO/TiO_2 Catalyst

Effect of support texture properties on Ni-Fe/γ-Al_2O_3 catalyst structure and catalytic performance for CO methanation

Catalysis of Reforming Methanol Steam for Generation of Hydrogen over Au/La2O3/TiO2 Catalyst

Effect of Ni Precipitation Method on CO Methanation over Ni/TiO2 Catalysts

Effect of Ni Precipitation Method on CO Methanation over Ni/TiO 2 Catalysts

Methanol steam reforming for hydrogen production over NiTiO3 nanocatalyst with hierarchical porous structure

Promotion effect of TiO2 on Ni/SiO2 catalysts prepared by hydrothermal method for CO2 methanation

Influence of Preparation Conditions of Ni/Al_2O_3 Catalyst on Its Activity in ydrogen Production by Ethanol Steam Reforming

Effect of Ni Addition on the Low Temperature Carbon Monoxide Oxidation over Au/HAP Nanocatalyst

Effect of Ni Content of Ni/-Al2O3 Catalysts Prepared by the Atomic Layer Deposition Method on CO2 Reforming of Methane

Studies on Ni/Al2O3 Catalyst for Hydrogen Production from Ethanol Steam Reforming

Effect of Formation of NiO-MgO Solid Solution on Activity and Stability of Ni/MgO-AN for CO2 Reforming of Methane

Effects of Preparation Method on the Performance of Ni/Al 2 O 3 Catalysts for Hydrogen Production by Bio-Oil Steam Reforming

Effect of Ni–V loading on the performance of hollow anatase TiO2 in the catalytic combustion of dichloromethane

Balance effect between Ni dispersion and hydrophobicity in CO 2 methanation over Ni/ZSM-5

Synergistic effect of Ni and NiO in hydrogen reduction for CO methanation

Preparation and Performance of Ni Nano-particle Doping with Pt for Methanol Electrocatalytic Oxidation