Abstract:CO 2 methanation involves the utilization of renewable hydrogen, greenhouse gases CO 2 as raw materials to transform them into clean energy sources in the form of methane. This procedure is of great significance for conserving energy and reducing emissions. In this study, a series of Ni/ZSM-5 catalysts with different Si/Al ratios were prepared. H 2 -TPR and XPS were employed to explore the influence of Al content on the properties of the Ni species. The adsorption properties of the reactants on the different Ni/ZSM-5 catalysts were investigated by CO 2 -TPD and H 2 -TPD. Moreover, as H 2 O is produced during the reaction, contact angle measurement were conducted to investigate the hydrophilicity and hydrophobicity of the samples. It is suggested that the ZSM-5 Si/Al ratio (or Al content) affected both Ni dispersion and catalyst hydrophilicity. The higher Al content in ZSM-5 improved Ni dispersion. However, high hydrophilicity is unfavorable for product removal, leading to poor catalytic performance. As a result, the Ni/ZSM-5 (41) sample with appropriate Si/Al exhibited good catalytic performance with CO 2 conversion of 64 % and CH 4 selectivity of >98 % at 350 °C. The CO 2 conversion and CH 4 selectivity remained at the initial level after reaction for 72 h. This indicates that the Ni/ZSM-5 (41) catalyst has excellent stability. Based on the characterization after the reaction, it can be observed that the catalyst exhibits good carbon deposition resistance and stability. Therefore, the choice of zeolite acid amount is crucial for the reaction performance. This study will provide guideline for the development of high-performance catalysts for CO 2 methanation-loaded Ni.

Effect of Ni Content of Ni/-Al2O3 Catalysts Prepared by the Atomic Layer Deposition Method on CO2 Reforming of Methane

Effect of support texture properties on Ni-Fe/γ-Al_2O_3 catalyst structure and catalytic performance for CO methanation

Cobalt-doped Ni-based catalysts for low-temperature CO 2 methanation

Improving Anti-Coking Properties of Ni/Al2O3 Catalysts via Synergistic Effect of Metallic Nickel and Nickel Phosphides in Dry Methane Reforming

Impacts of Nickel Loading on Properties, Catalytic Behaviors of Ni/γ–Al2O3 Catalysts and the Reaction Intermediates Formed in Methanation of CO2

Atomic Layer Deposition of Ni on Cu Nanoparticles for Methanol Synthesis from CO2 Hydrogenation

Effect of Modified Alumina Support on the Performance of Ni-Based Catalysts for CO2 Reforming of Methane

Carbon Deposition on Meso-Porous Al2o3 Supported Ni Catalysts in Methane Reforming with Co2

Study on CO2 reforming of methane to syngas over Al 2O3-ZrO2 supported Ni catalysts prepared via a direct sol-gel process

Hierarchical hollow Ni/γ-Al2O3 catalyst derived from flower-like Ni-Al layered double hydroxide with stable catalytic performance for CO2 methanation

Meso-porous Ni/Mg/Al catalysts for methane reforming with CO2

Bound-state Ni species — a superior form in Ni-based catalyst for CH4/CO2 reforming

Performance of supported nickel catalyst for reforming of CH 4 with CO 2 to syngas: I. Effect of preparation conditions and Ni loading

Effect of Ca Promoter on the Structure, Performance, and Carbon Deposition of Ni-Al 2 O 3 Catalyst for CO 2 -CH 4 Reforming

Carbon Deposition on Borated Alumina Supported Nano-Sized Ni Catalysts for Dry Reforming of CH4

Balance effect between Ni dispersion and hydrophobicity in CO 2 methanation over Ni/ZSM-5

Synthesis of nickel catalysts supported on Zr-doped ordered mesoporous Al2O3 and their catalytic performance for low-temperature CO2 reforming of CH4

Robust nanosheet-assembled Al 2 O 3 -supported Ni catalysts for the dry reforming of methane: the effect of nickel content on the catalytic performance and carbon formation

Development of Highly Stable Ni-Al 2 O 3 Catalysts for CO Methanation

Improved performance of Ni/Al2O3 catalyst deriving from the hydrotalcite precursor synthesized on Al2O3 support for dry reforming of methane

Studies on carbon deposition of Ni catalyst in CH4-CO2 reforming reaction