Abstract:Hydrogen is considered one of the most promising energy vectors in order to match the current energy and environmental issues. Bioethanol steam reforming is a sound opportunity and close to the industrialization considering an integrated biorefinery concept. MgAl2O4 was selected as a stable support, with improved activity, selectivity and stability due to negligible acidity. Increasing the Ni loading from 1.5 to 10 wt% over MgAl2O4 improved the conversion of ethanol as well as the yield of hydrogen, while the carbon deposition and yield of byproducts decreased. Small acidity characterised the samples, attributed exclusively to the Ni active phase. This prevented extensive catalyst coking due to ethylene formation and subsequent polymerisation. Consequently, small coke amount was found on the spent catalysts, mainly amorphous, allowing rather easy regeneration. DRIFT analysis of adsorbed ethanol at variable temperature evidenced the intermediates of reaction and their evolution with temperature, allowing to suggest the main reaction paths. Acetaldehyde was found as intermediate, rapidly evolving to reformate. Among the possible evolution paths of acetaldehyde, the oxidation to acetate and carbonate species (likely stabilised by the support) was preferred with respect to decomposition to methane and CO. This is reflected in the products distribution evidenced through activity testing.

Studies on Ni/Al2O3 Catalyst for Hydrogen Production from Ethanol Steam Reforming

Hydrogen Production from Ethanol Steam Reforming over Ni/Al2O3 and Ni/La2O3 Catalysts at Low Temperature

Catalysts Research for Hydrogen Production from Steam Reforming of Ethanol over Ni-Fe/γ-Al2O3

Influence of Preparation Conditions of Ni/Al_2O_3 Catalyst on Its Activity in ydrogen Production by Ethanol Steam Reforming

Investigation of Ni/SiO2 Catalysts Prepared at Different Conditions for Hydrogen Production from Ethanol Steam Reforming

Steam reforming of ethanol for hydrogen production: influence of catalyst composition (Ni/Al2O3, Ni/Al2O3–CeO2, Ni/Al2O3–ZnO) and process conditions

Dimethyl Ether Steam Reforming for Hydrogen Production over Cu-Ni/gamma-Al2O3 Bi-Functional Catalyst

Hydrogen production from ethanol steam reforming over nickel based catalyst derived from Ni/Mg/Al hydrotalcite-like compounds

Dimethyl Ether Steam Reforming for Hydrogen Production over Cu-Ni/γ-Al_2O_3 Bi-Functional Catalyst

Hydrogen Production from Steam Reforming of Ethanol Using Ni/CeO2 and Ni-Cu/CeO2 Catalysts

Hydrogen production via glycerol steam reforming over Ni/Al 2O3: Influence of nickel precursors

Ni-hydrocalumite Derived Catalysts for Ethanol Steam Reforming on Hydrogen Production

Effects of Preparation Method on the Performance of Ni/Al 2 O 3 Catalysts for Hydrogen Production by Bio-Oil Steam Reforming

Activity of Ni-Cu-Al based catalyst for renewable hydrogen production from steam reforming of glycerol

Ethanol Steam Reforming over Ni-Cu/Al2O3-MyOz (M = Si, La, Mg, and Zn) Catalysts

Preparation and Performance of the Catalyst in the Steam Reforming of Ethanol

Hydrogen Production by Ethanol Steam Reforming on Nicumgal Catalysts Derived from Hydrotalcite-Like Precursors

Steam reforming of ethanol over Ni/MgAl2O4 catalysts

From Steam Reforming of Ethanol at Low Temperature over , and Catalysts for Fuel-Cell Application

Production of Hydrogen by Ethanol Steam Reforming over Ni/ZrO2 Catalyst

Experimental and Subsequent Mechanism Research on the Steam Reforming of Ethanol over A Ni/Ceo2 Catalyst