Abstract:Catalytic steam reforming of ethanol is considered as a promising technology for producing H2 in the modern world. In this study, using a fixed‐bed reactor, steam reforming of ethanol was performed for production of carbon nanotubes (CNTs) and H2 simultaneously at 600°C on Ni/CaO catalysts. Commercial CaO and a synthetic CaO prepared using sol‐gel were scrutinized for ethanol's catalytic steam reforming. Analysis results of N2 isothermal adsorption indicate that the CaO synthesized by sol‐gel has more pore volume and surface area in comparison with the commercial CaO. When Ni was loaded, the Ni/CaO catalyst shows an encouraging catalytic property for H2 production, and an increase in Ni loading could improve H2 production. The Ni/CaO catalyst with sol‐gel CaO support has presented a higher hydrogen production and better catalytic stability than the catalysts with the commercial CaO support at low Ni loading. The highest hydrogen yield is 76.8% at Ni loading content of 10% for the Ni/sol‐gel CaO catalyst with WHSV of 3.32/h and S/C ratio of 3. The carbon formed after steam reforming primarily consists of filamentous carbons and amorphous carbons, and CNTs are the predominant type of carbon deposition. The deposited extent of carbon on the used Ni/CaO catalyst lessen upon more Ni loading, and the elongated CNTs are desired to be formed at the surface of the Ni/sol‐gel CaO catalyst. Thus, an efficient process and improved economic value is associated with prompt hydrogen production and CNTs from ethanol steam reforming.

Hydrogen Production from Steam Reforming of Ethanol Using Ni/CeO2 and Ni-Cu/CeO2 Catalysts

Hydrogen production by steam reforming of ethanol over flowerlike micro spheres NiO/CeO 2 catalyst

Sorption-Enhanced Steam Reforming of Glycerol for Hydrogen Production over a NiO/NiAl2O4 Catalyst and Li2ZrO3-Based Sorbent

Catalytic Steam Reforming of Ethanol for Hydrogen Production over Ni/Ceo2-Zro2 Catalysts

Steam reforming of ethanol for hydrogen production: influence of catalyst composition (Ni/Al2O3, Ni/Al2O3–CeO2, Ni/Al2O3–ZnO) and process conditions

Hydrogen Production from Ethanol Steam Reforming over Ni/Al2O3 and Ni/La2O3 Catalysts at Low Temperature

Studies on Ni/Al2O3 Catalyst for Hydrogen Production from Ethanol Steam Reforming

Hydrogen production through glycerol steam reforming over the NiCexAl catalysts

Hydrogen Production by Steam Reforming of Ethanol over Flowerlike Micro Spheres NiO/La2O3 Catalyst

Hydrogen production from ethanol by steam reforming with recyclable NiCaO x /NaCl catalysts

Ni–Co Bimetallic Catalysts for Hydrogen Production by Steam Reforming Ethanol

Methane steam reforming for hydrogen production using low water-ratios without carbon formation over ceria coated Ni catalysts

Catalytic Steam Reforming of Bio-Oil-Derived Acetic Acid over CeO 2 -ZnO Supported Ni Nanoparticle Catalysts

Effect of CeO 2 Morphology in Catalytic Performance via Methanol Oxidative Steam Reforming for Hydrogen Production

Ethanol steam reforming on Ni/CaO catalysts for coproduction of hydrogen and carbon nanotubes

Experimental and Subsequent Mechanism Research on the Steam Reforming of Ethanol over A Ni/Ceo2 Catalyst

Hydrogen Production by Steam Reforming of Ethanol over CuO-La_2O_3/ZrO_2 Catalyst

Hydrogen Production Via Steam Reforming of Methanol on Cu/ZnO/Al2O3 Catalysts: Effects of Al2O3 Precursors

Ni-hydrocalumite Derived Catalysts for Ethanol Steam Reforming on Hydrogen Production

From Steam Reforming of Ethanol at Low Temperature over , and Catalysts for Fuel-Cell Application

Hydrogen from steam reforming of ethanol in low and middle temperature range for fuel cell application