Abstract:The coal fast pyrolysis/circulating fluidized bed combustion/catalytic reactor coupled fractionation conversion process is easy to operate and maintain, with significant economic benefits, which is one of the effective ways to achieve clean and efficient utilization of coal resources. However, due to the poor tar quality and high pollution element content produced by the rapid coal pyrolysis process, the catalyst is frequently deactivated and regenerated. Therefore, a cheap and efficient non regenerative catalyst has been prepared in this paper. The effects of calcination temperature and modification method of catalyst on the catalytic cracking characteristics of coal tar were investigated in a fixed bed catalytic reactor with low-temperature coal tar as raw material and natural dolomite as research object. The 1% Ni/2%Fe dolomite catalyst was prepared under the optimum preparation conditions, and the effect of reaction temperature on the catalytic cracking of coal tar was investigated. The results show that with the increase of calcination temperature, the main components of dolomite, such as CaCO 3 and MgCO 3 is promoted to convert into CaO and MgO active substances, and the activity of natural dolomite catalyst gradually increases and tends to be stable, with the optimal calcination temperature of 750 ℃. The cracking of tar is not promoted by introducing Fe alone, but the catalytic activity of natural dolomite catalyst is significantly improved by introducing Ni and Fe at the same time. The best modification method is 1% Ni/2% Fe dolomite. The introduction of Fe as a promoter protects the sulfur poisoning deactivation of the active component Ni, while the introduction of Ni and Fe alleviates the sintering phenomenon of the catalyst. Fe can be used as an auxiliary agent to slow down the generation of carbon deposits in the catalytic process. The dolomite catalyst modified by Ni promotes the cracking of aliphatic compounds and sulfur-containing compounds. Indene and naphthalene compounds do not undergo cracking reactions, but products such as hydroindene and hydronaphthalene appear.

PERFORMANCE OF CATALYTIC CRACKING OF BIOMASS TAR

Performance of catalytic cracking of biomass tar and catalyst preparation

Catalytic Cracking of Biomass Tar over Ni-Based on Palygorskite

CATALYTIC CRACKING OF TAR DERIVED FROM BIOMASS PYROLYSIS

Low-Temperature Catalytic Cracking of Biomass Gasification Tar over Ni/HZSM-5

Catalytic Behaviors of Porous Ni/dolomite Pellets for Decomposition of Tar from Biomass Gasification

Heterogeneous Cracking Reaction of Tar over Biomass Char, Using Naphthalene As Model Biomass Tar

Influence of Catalytic Cracking of Tar on Gas Component

Experimental Study on Catalytic and Thermal Cracking of Tar from Biomass Pyrolysis

Experimental Investigation on Catalyst Deactivation in Catalytic Cracking of Biomass Tar

Biomass-Derived Bimetallic Ni-Fe Catalyst with Enhanced Tar Removal Performance

Steam Reforming of Biomass Tar Model Compounds over Monolithic Catalysts

Cracking of Model Tar Species from the Gasification of Municipal Solid Waste Using Commercial and Waste-Derived Catalysts

Effects of Catalytic Cracking Conditions on Biomass Tar Cracking

Effects of Solid Acid and Alkali Catalysts on Catalytic Cracking of Biomass Tar

Preparation and characterization of furfural residue derived char-based catalysts for biomass tar cracking

Secondary Tar Components in the Catalytic Cracking Process of Biomass Tar

Experimental Study on the Cracking of Tar Derived from Municipal Solid Waste Gasification to Produce Syngas

Preparation and catalytic cracking characteristics of coal tar cracking catalyst

Experimental study on hydrogen production from heavy tar in biomass gasification furnace catalyzed by carbon-based catalysts

Catalytic Conversion of Tar from Hot Coke Oven Gas Using 1-Methylnaphthalene As a Tar Model Compound