Abstract:The coal fast pyrolysis/circulating fluidized bed combustion/catalytic reactor coupled fractionation conversion process is easy to operate and maintain, with significant economic benefits, which is one of the effective ways to achieve clean and efficient utilization of coal resources. However, due to the poor tar quality and high pollution element content produced by the rapid coal pyrolysis process, the catalyst is frequently deactivated and regenerated. Therefore, a cheap and efficient non regenerative catalyst has been prepared in this paper. The effects of calcination temperature and modification method of catalyst on the catalytic cracking characteristics of coal tar were investigated in a fixed bed catalytic reactor with low-temperature coal tar as raw material and natural dolomite as research object. The 1% Ni/2%Fe dolomite catalyst was prepared under the optimum preparation conditions, and the effect of reaction temperature on the catalytic cracking of coal tar was investigated. The results show that with the increase of calcination temperature, the main components of dolomite, such as CaCO 3 and MgCO 3 is promoted to convert into CaO and MgO active substances, and the activity of natural dolomite catalyst gradually increases and tends to be stable, with the optimal calcination temperature of 750 ℃. The cracking of tar is not promoted by introducing Fe alone, but the catalytic activity of natural dolomite catalyst is significantly improved by introducing Ni and Fe at the same time. The best modification method is 1% Ni/2% Fe dolomite. The introduction of Fe as a promoter protects the sulfur poisoning deactivation of the active component Ni, while the introduction of Ni and Fe alleviates the sintering phenomenon of the catalyst. Fe can be used as an auxiliary agent to slow down the generation of carbon deposits in the catalytic process. The dolomite catalyst modified by Ni promotes the cracking of aliphatic compounds and sulfur-containing compounds. Indene and naphthalene compounds do not undergo cracking reactions, but products such as hydroindene and hydronaphthalene appear.

Catalytic Cracking of Biomass Tar over Ni-Based on Palygorskite

Low-Temperature Catalytic Cracking of Biomass Gasification Tar over Ni/HZSM-5

Catalytic Pyrolysis of Tar Model Compound with Various Bio-Char Catalysts to Recycle Char from Biomass Pyrolysis

Development of nano-niO/Al2O3 catalyst to be used for tar removal in biomass gasification

Ni-loaded hydroxyapatite containing various Ca/P ratios for use in the catalytic decomposition of biomass tar at low temperatures

Catalytic Pyrolysis of Bituminous Coal under Pyrolysis Gas over A Ni/Mgo Catalyst

Influence of Catalytic Cracking of Tar on Gas Component

Nickel catalyst in coupled plasma-catalytic system for tar removal

Study on the mechanism of carbon nanotube-like carbon deposition in tar catalytic reforming over Ni-based catalysts

Tar Removal in Pine Pyrolysis Catalyzed by Bio-Char Supported Nickel Catalyst

Effect of Additives on Cracking Characteristics of Dust-Containing Tar over Nickel-Based Catalysts

Synthesis of biomimetic monolithic biochar-based catalysts for catalytic decomposition of biomass pyrolysis tar

Experimental study on catalytic effect of biomass pyrolysis volatile over nickel catalyst supported by waste iron slag

Preparation and characterization of furfural residue derived char-based catalysts for biomass tar cracking

Steam Reforming of Biomass Tar Model Compounds over Monolithic Catalysts

CATALYTIC CRACKING OF TAR DERIVED FROM BIOMASS PYROLYSIS

Preparation and catalytic cracking characteristics of coal tar cracking catalyst

Effect of Operating Conditions on the Coke Formation and Nickel Catalyst Performance During Cracking of Tar

Study on regeneration characteristics and dust deposition mechanism of nickel based tar-cracking catalyst

Effects of Catalyst Particle Size and Mass on Catalytic Cracking of Biomass Pyrolysis Tar

Slow pyrolysis experimental investigation of biomass tar formation and hydrogen production by tar reforming