Abstract:SiCf/SiC composites, as promising materials for the hot‐section components of turbine engines, are susceptible to hot corrosion due to the steam environments. Especially, under rotational and thermal stress, numerous microcracks may be generated in the SiCf/SiC ceramic matrix, which can trigger the rapid invasion of corrosive gases and deteriorate the composite mechanical properties. Therefore, it is of great importance to investigate the degradation mechanisms of SiCf/SiC with precracks existing. Here, the corrosion behavior of precracked SiCf/SiC in the Na2SO4‐wet‐oxygen environment was evaluated. By comparing mechanical evolution under different corrosion conditions, microfailure mechanisms of SiCf/SiC were revealed. The results indicate that brittle cracking of the matrix and oxidation erosion of fibers are the key factors in reducing the tensile strain of composites. Specifically, the composite damage resistance increases at 67 MPa‐1300°C. At this point, the prestress level is moderate and close to the matrix cracking limit. The prefabricated microcracks can be healed at 1300°C by liquid oxidation products, which hinders cracks bridging large‐scale. This study is conducive to a better understanding of failure mechanisms of SiCf/SiC in complex service environments.

Corrosion of a SiC-C/PyC/SiC Composite by Sodium Sulfate Vapor at High Temperatures

Corrosion behavior of precracked SiCf/SiC composites under 1200–1300°C Na2SO4‐wet‐oxygen environment

Microstructural and mechanical evolution of SiCf/SiC composites in wet oxygen atmosphere above 1000 degrees C

The corrosion behavior of CVD SiC coatings on SiCf/SiC composites in a simulated molten salt reactors environment

The Corrosion Behavior of CVI SiC Matrix in SiC F /sic Composites under Molten Fluoride Salt Environment

Stress-corrosion Behavior of SiCf/SiC under CMAS-wet-oxygen Environments

Oxidation Behavior of SiC/SiC Composites in Air at High Temperature

Corrosion behavior of CVI 2D Cf/SiC composites under high temperature burner rig tests

The corrosion resistance mechanisms of the cr-coated SiC in molten Na2SO4 salt: Strengthened boundaries and protective scales

The impact of water and oxygen contents on the corrosion performance of yttrium silicate modified SiC f /SiC composites under high temperature conditions

Comparison of Oxidation Behaviors of 3D C/PyC/SiC and SiC/PyC/SiC Composites in an O2-Ar Atmosphere

The Comparative Investigation of Oxidation Behavior and Corrosion Mechanisms of SiC Matrix Ceramics under Different Atmospheres

Effect of deposition temperature on the corrosion behavior of CVD SiC coatings on SiCf/SiC composites under simulated PWR conditions

High-Temperature Fatigue Degradation Behaviors of a 3D Braided C/SiC with a Thin Interlayer in Different Dry Oxygen Atmospheres

The Oxidation Behavior and Corrosion Mechanism of SiC Matrix Ceramics in a High Temperature Wet Air Environment

A Novel Strategy to Improve the Corrosion Resistance of Sicf/Sic Composites in High-Temperature Combustion Environments by Cooperation of Self-Healing Sibcn and High-Stability Yb2si2o7

Internal Friction Behavior Of C/Sic Composites With Environmental Barrier Coatings In Corrosive Environment

High-temperature corrosion of a Si3N4/W composite exposed to molten MgCl2-NaCl-KCl salts

Microstructure and corrosion behavior of in-situ grown Y3Si2C2 coated SiC fibers exposed to air and wet-oxygen at 1400 °C

Mechanical Properties and Oxidation Behaviors of Self-Healing SiC F /Sic-Sibcn Composites Exposed to H 2 O/O 2 /na 2 SO 4 Environments

Corrosion behaviors of Ti3SiC2/Cu composites in molten salts