Abstract:The influence of processing and microstructure on the mechanical properties of Sialon-based ceramics, in-situ self-toughening induced by heat treatment and second-phase toughened, was investigated. Three kinds of Sialon-based ceramic materials were covered in the research: 1. TiB(p), MoSi2(p), SiC(p), and SiC(w) second-phase reinforced Sialon materials; 2. alpha/beta-double-phase-Sialon ceramics, using rare earth oxides Nd2O3, Dy2O3, and Yb2O3 as sintering additives, 3. Sialon ceramics with elongated alpha-sialon grains. The experimental resules showed that as to TiB(p), MoSi2(p), SiC(p), and SiC(w) second-phase reinforced Sialon materials, the toughening effect is mainly controlled by the bonding between matrix and second-phase and the critical size of second-phase particles. In Nd2O3-, Dy2O3-, and Yb2O3-added Sialon ceramics, Nd2O3 is a kind of effective sintering additive and Nd-Sialon possesses the highest K-1c, value (7.0 MPa.m(1/2)) due to the elongated beta-Sialon grains developed by heat treatment in order to induce in-situ self-toughening mechanism. Yb2O3 is not only an effective sintering additive, but also a useful alpha-Sialon stabilizer, so Yb-Sialon is hard, with a highest Vickers hardness H-v10 of 18.0 GPa, because of the existing of equiaxed alpha-Sialon grains in the samples. The action of Dy2O3 is between Nd2O3 and Yb2O3. The growth mechanism of elongated alpha-sialon grains is declared to be the heterogeneous nucleation and anisotropic growth.

Combustion synthesis and sintering of rod-like Yb α-Sialon powders

Combustion synthesis and sintering of rod-like Yb alpha-sialon powders

Combustion synthesis of rod-like Yb alpha-sialon powders

Low-temperature Preparation of in Situ Toughened Yb Α-Sialon Ceramics by Spark Plasma Sintering (SPS) with Addition of Combustion Synthesized Seed Crystals

Novel rod-like yttrium α-sialon crystalline powders prepared by combustion synthesis

Pressureless sintering of in-situ toughened Yb α-SiAlON ceramics by adding seed crystals prepared by combustion synthesis

Effects of Technical Parameters on the Phase Composition and Microstructure of Yb Α-Sialon Prepared by Combustion Synthesis

In Situ Toughened Α-Sialon Ceramics Doped with Lutecia and Ytterbia

Fabrication of Yb alpha-SiAlON ceramics by SPS with crystal seeds prepared through combustion synthesis

MICROSTRUCTURE CONTROL AND MECHANICAL PROPERTIES OPTIMIZATION OF Α-Sialon CERAMICS

Effect of NH4F and Temperature on Combustion Synthesis of Rod-Like Yb α-Sialon Powder

Influence of Processing and Microstructure on Mechanical Properties in Sialon-Based Ceramics

Effects Of Technical Parameters On The Phase Composition And Microstructure Of Yb Alpha-Sialon Prepared By Combustion Synthesis

Sintering of<Emphasis Type="Italic">β</Emphasis>-sialon with 5mol% Y<Subscript>2</Subscript>O<Subscript>3</Subscript>-ZrO<Subscript>2</Subscript> additives

Effect of Diluents and NH4F Additive on the Combustion Synthesis of Yb Α-Sialon

Preparation of tough ÃÂ¡-SiAlON ceramics by spark plasma sintering with ÃÂ¢-Si3N4 as raw materials

Study on Phase Transformation and Microstructure Development of Yb Α-Sialon Ceramics Prepared by Pressureless Sintering

Effect of Different Rare-Earth on Microstructure and Properties of alpha-Sialon Ceramics

Study On The Anisotropic Growth Of Rod-Like Yb Alpha-Sialon Crystals Prepared By Combustion Synthesis

Rapid Densification and Reaction Sequences in Self-Reinforced Y-α-SiAlON Ceramics with Barium Aluminosilicate As an Additive

Refractory self-reinforced Y-α-SiAlON with barium aluminosilicate glass ceramic addition