Abstract:Various fluorine-containing Y-SiAlON glass-ceramics from a mixture of Y2O3, α-Si3N4, SiO2, and Al2O3 using AlF3 as the fluorine source were prepared by one-step or two-step carbothermal reduction process. X-ray diffraction (XRD) and scanning electron microscope (SEM) were used to study the crystallization behavior of the glass-ceramics. The compositions of the crystals and the glass phase were semi-quantitatively determined by EDX. The final glass-ceramics contained N-containing melilite (Y2Si3O3N4) and β-Si3N4 together with a secondary phase of yttrium aluminum garnet (YAG, Y3Al5O12). The investigated Y-SiAlON glass-ceramics with higher F content showed better sintering properties. Fluorine has important effects on crystallization of glass-ceramics as it affects the crystallization mechanism by reducing the thermal energy barrier for crystallization. By controlling the reaction, the Y-SiAlON glass-ceramics are first held at 1300°C for 4h, which contrasts with the samples obtained after direct sintering at 1550°C, the conversion to Y2Si3O3N4 and β-Si3N4 is promoted and the final microstructure consists of elongated β-Si3N4 grains. These glass-ceramics showed relatively better mechanical properties.

Study on Phase Transformation and Microstructure Development of Yb Α-Sialon Ceramics Prepared by Pressureless Sintering

Pressureless sintering of in-situ toughened Yb α-SiAlON ceramics by adding seed crystals prepared by combustion synthesis

Phase transformation and microstructure development of in situ toughened Yb α-SiAlON ceramics prepared by two-step hot-pressing

Low-temperature Preparation of in Situ Toughened Yb Α-Sialon Ceramics by Spark Plasma Sintering (SPS) with Addition of Combustion Synthesized Seed Crystals

Fabrication of Yb alpha-SiAlON ceramics by SPS with crystal seeds prepared through combustion synthesis

Effect of seed addition with combustion synthesized powder on pressureless sintering of Y alpha-SiAlON

Effects Of Technical Parameters On The Phase Composition And Microstructure Of Yb Alpha-Sialon Prepared By Combustion Synthesis

Effects of Technical Parameters on the Phase Composition and Microstructure of Yb Α-Sialon Prepared by Combustion Synthesis

Sintering Behavior, Microstructure and Mechanical Properties of Various Fluorine-Containing Y-SiAlON Glass-Ceramics

MICROSTRUCTURE CONTROL AND MECHANICAL PROPERTIES OPTIMIZATION OF Α-Sialon CERAMICS

Combustion synthesis and sintering of rod-like Yb α-Sialon powders

Microstructure Characteristics And High-Temperature Performance Of In-Situ Reinforced Alpha-Sialon Ceramics

Controlled sintering and phase transformation of yttria-doped tetragonal zirconia polycrystal material

Composition controlled microstructure and mechanical properties of Yb/Lu co-doped SiAlON

Rapid Densification and Reaction Sequences in Self-Reinforced Y-α-SiAlON Ceramics with Barium Aluminosilicate As an Additive

Combustion synthesis and sintering of rod-like Yb alpha-sialon powders

In Situ Toughened Α-Sialon Ceramics Doped with Lutecia and Ytterbia

Combustion synthesis of rod-like Yb alpha-sialon powders

Study On The Anisotropic Growth Of Rod-Like Yb Alpha-Sialon Crystals Prepared By Combustion Synthesis

Effect Of Aln Content On The Pressureless Sintering Behaviors Of Sic-Aln Multiphase Ceramics

Effects of starting compositions on the phase composition and microstructure of Yb α-SiAlON prepared by combustion synthesis