Abstract:Surface discharge induced by metal particles is a common insulation failure in many high-voltage equipment. In order to further understand the mechanisms of this surface discharge, a 2D simulation model of a plate-surface-plate structure with a pin is established and verified by experiments in this paper to simulate the actual discharge configurations, and the evolution characteristics of the positive and negative surface discharges are compared. The evolutions of both positive and negative discharges could be divided into two phases: the bridging phase and the expansion phase. As the electric field in the gap between the streamer and the dielectric surface is strengthened by the effect of the space charge, the ionization sources and the secondary electrons excited on the dielectric surface, the dielectric surface presents attraction to the streamer, and subsequently the two streamer routes first touch the dielectric surface and then arrive at the grounding electrode. However, the channel branching is the most distinctive characteristic of the positive and negative discharges. In the positive discharge, the channel first branches, then merges, and finally expands, and the gaps of pin to dielectric surface and pin to grounding electrode are broken down by two slender positive branches, respectively. The negative discharge presents a stout channel without branching, which develops and expands simultaneously. This is ascribed to the thinner space charge layer, the weaker shielding effect of the internal electric field and the more active movement of the internal charges in the positive discharge. Another important factor for the discharge branching is the appropriate matching of the sheath thickness and the curvature radius of the channel's head.

2-Dimensional Analysis of Surface Electric Field Profile of Planar Junction with Single-Step Field-Plate Termination Structure

Electromagnetic–Thermo–Mechanical Coupling Behavior of Cu/Si Layered Thin Plate under Pulsed Magnetic Field

A semi-theoretical relationship between the breakdown voltage of field plate edge and field plate design in planar P–N junction terminated with finite field plate

A Concise Analytical Approach For Predicting The Voltage And Edge Peak Field Profiles Of The Planar Junction With A Single Floating Field Limiting Ring

Analytical Model of Three-Dimensional Effect on Voltage and Edge Peak Field Distributions and Optimal Space for Planar Junction with a Single Field Limiting Ring

Analytical Solutions for Breakdown Voltage and Electric Field Distribution along Junction Edge for Planar Abrupt Junction

A New Quasi 2-Dimensional Analytical Approach to Predicting RingJunction Voltage,Edge Peak Fields and Optimal Spacing of PlanarJunction with Single Floating Field Limiting Ring Structure

Analytical Model for the Surface Electrical Field Distributions of Double RESURF Devices with Gaussian-doped P-top Region

Analysis and Design of Field Plates of High Voltage LDMOS

A Concise Analytical Model For The Surface Field Distribution Of Tfsoi Resurf Devices Including Interface Charge Effect

A Novel Analytical Model for Surface Electrical Field Distribution and Optimization of TFSOI RESURF Devices

Analytical Model of Surface Field Distribution and Breakdown Voltage for RESURF LDMOS Transistor

An Analytical Model for the 3D-RESURF Effect

A New Analytical Model For The Surface Field Distribution And Optimization Of Thin Film Soi Resurf Devices

Theoretical Study of an Effective Field Plate Termination for SiC Devices Based on High-k Dielectrics

An Analytical Model of the Surface Electrical Field Distributions of RFP LDMOS and Its Optimum Design

Simulation comparison of the positive and negative surface discharges induced by metal particles in a plate-surface-plate structure under DC excitation in atmospheric air

Theoretical analysis of distributions of the peak field and breakdown voltage along the metallurgical junction edge based on an elliptic cylindrical solution

Quasi-2-D analytical model for the surface field distribution and optimization of RESURF LDMOS transistor

Improved Analytical Model of Surface Potential with Modified Boundary Conditions for Double Gate Tunnel FETs.

A circuit-oriented model for gapped power-ground planes