Abstract:The deep penetration of implanted As is reported and its effect On source-drain regions in NMOS devices is examined. When annealing methods to minimize diffusion are used and the initial implant profiles are not modeled accurately to take into account deep penetration, the junction depths predicted by simulation will be shallower than those obtained in practice. This is verified by comparing experimental results with predicted profiles obtained from two process simulators that use different implantation models. It is shown that a Pearson IV distribution can accurately describe the as-implanted profile of As in Si. From measurements of implanted As profiles annealed Using furnace and electron-beam methods, it is found that junction depths determined by implantation can be unchanged at low backgrounds, even after relatively high-temperature (1000°C) furnace anneals. As a consequence, low-temperature furnace or transient annealing does not yield the expected reduction in junction depth, while resulting in a significant increase in sheet resistivity.

A Concise Analytical Approach For Predicting The Voltage And Edge Peak Field Profiles Of The Planar Junction With A Single Floating Field Limiting Ring

Analytical Model of Three-Dimensional Effect on Voltage and Edge Peak Field Distributions and Optimal Space for Planar Junction with a Single Field Limiting Ring

A New Quasi 2-Dimensional Analytical Approach to Predicting RingJunction Voltage,Edge Peak Fields and Optimal Spacing of PlanarJunction with Single Floating Field Limiting Ring Structure

Theoretical analysis of distributions of the peak field and breakdown voltage along the metallurgical junction edge based on an elliptic cylindrical solution

Analytical Solutions for Breakdown Voltage and Electric Field Distribution along Junction Edge for Planar Abrupt Junction

2-Dimensional Analysis of Surface Electric Field Profile of Planar Junction with Single-Step Field-Plate Termination Structure

Equivalent doping profile transformation: a semi-empirical, analytical method for predicting breakdown characteristics of an approximate single-diffused parallel-plane junction

Equivalent Doping Transformation Method for Predicting Breakdown Voltage and Peak Field at Breakdown of Epitaxial-Diffused Punch-Through Junction

A semi-theoretical relationship between the breakdown voltage of field plate edge and field plate design in planar P–N junction terminated with finite field plate

Equivalent junction method to predict 3-D effect of curved-abrupt p-n junctions

A New Analytic Method to Design Multiple Floating Field Limiting Rings of Power Devices

An Analytical Model for the 3D-RESURF Effect

Simulation of reverse breakdown in planar P-N junctions

Implantation-dominated Junction Depths of Low-Temperature and Electron-Beam-annealed As Source—drain Regions

A Concise Analytical Model For The Surface Field Distribution Of Tfsoi Resurf Devices Including Interface Charge Effect

Equivalent Junction Transformation: A Semi-Empirical Analytical Method For Predicting The Breakdown Characteristics Of Cylindrical- And Spherical-Abrupt Pn Junctions

A Two-Dimensional Analytical Model for Short Channel Junctionless Double-Gate MOSFETs

Equivalent Doping Profile Transformation: a New Analytical Method to Predict Breakdown Voltage of the Composite Pn Junction

Prediction of Breakdown Voltage of Asymmetric Linearly-Graded Junction by Equivalent Doping Profile Transformation Method

Electric Field Distribution Around Drain-Side Gate Edge in AlGaN/GaN HEMTs: Analytical Approach

A New Analytical Model For The Surface Field Distribution And Optimization Of Thin Film Soi Resurf Devices