Abstract:Considering the frequent breakage of the hard jumper shield ring in the strain tower of ultra-high voltage alternating current 1000 kV Nan-Jing Transmission Line, the theoretical and experimental studies on new shield ring were carried out in terms of mechanical properties; however, due to the structural changes of shield ring, the field characteristics should be calculated and analyzed. In accordance with the theory that there is no electric field in a metal conductor under electrostatic equilibrium, if there is any metal conductor in the 3D model of the computational domain, there will be no need to subdivide the metal conductor. In this paper, a 3D model load applying method with metal conductors was proposed to calculate the field intensity of Tuned mass damper (TMD) shield ring after improving the mechanical properties of the strain tower, which saved the total number of mesh subdivisions by 48.02%, reduced the computational time by 76.47%, and increased the computational efficiency of 3D numerical electric field. The calculation results validated the correctness and effectiveness of this method. The new TMD shield ring with the field intensity meeting the relevant requirements was adopted in 1000 kV Nan-Jing Loop Transmission Line in December 2016, which has been operating in good condition so far.

Analytical Model of Three-Dimensional Effect on Voltage and Edge Peak Field Distributions and Optimal Space for Planar Junction with a Single Field Limiting Ring

A New Quasi 2-Dimensional Analytical Approach to Predicting RingJunction Voltage,Edge Peak Fields and Optimal Spacing of PlanarJunction with Single Floating Field Limiting Ring Structure

A Concise Analytical Approach For Predicting The Voltage And Edge Peak Field Profiles Of The Planar Junction With A Single Floating Field Limiting Ring

Theoretical analysis of distributions of the peak field and breakdown voltage along the metallurgical junction edge based on an elliptic cylindrical solution

Analytical Solutions for Breakdown Voltage and Electric Field Distribution along Junction Edge for Planar Abrupt Junction

A New Analytic Method to Design Multiple Floating Field Limiting Rings of Power Devices

An Analytical Model for the 3D-RESURF Effect

2-Dimensional Analysis of Surface Electric Field Profile of Planar Junction with Single-Step Field-Plate Termination Structure

Equivalent junction method to predict 3-D effect of curved-abrupt p-n junctions

Simulation of reverse breakdown in planar P-N junctions

An analytical model for electric field distribution of positively beveled abrupt PN junctions

A semi-theoretical relationship between the breakdown voltage of field plate edge and field plate design in planar P–N junction terminated with finite field plate

Equivalent Junction Transformation: A Semi-Empirical Analytical Method For Predicting The Breakdown Characteristics Of Cylindrical- And Spherical-Abrupt Pn Junctions

Electric Field Distribution in Charge Imbalance Super Junction

3-D analytical model of the high-voltage interconnection effect for SOI LDMOS

An Analytical Model of the Electric Field Distributions of Buried Superjunction Devices

Avalanche Breakdown Characteristics Of 3-D Curved-Abrupt Junctions Predicted By Equivalent Junction Technique

An analytical model for SOI triple RESURF devices

Optimization of Specific ON-Resistance of Superjunction Device with Two-Zones Variation Vertical Doping Profile

SPICE Model of Annular Gate Device Based on Electric Field Distribution

Electrostatic Field Calculation and Structure Optimization of New Shield Ring of 1000 Kv Nan-Jing Loop Transmission Line