Abstract:The construction of deeply buried tunnels has intensified concerns regarding shrinkage cracking and the long-term performance deterioration of lining concrete in dry-hot environments. These issues are related to the dynamic interconversion of internal moisture states, the changing moisture behavior over time, and the evolution of calcium silicate hydrate (C-S-H) properties. However, the mechanisms underlying these phenomena are not fully understood. This study investigates the dynamics of moisture content across different states, the source and composition of evaporated water, as well as the mechanism of change in the microscopic properties of C-S-H in concrete subjected to dry-hot conditions (40°C and 60°C) and standard curing environments through tests on water loss rates, chemically bound water, and low-field nuclear magnetic resonance. The findings reveal that at 40°C and 60°C, hydration products were generated rapidly before mold removal, leading to significant increases in chemically bound water, interlayer water, and gel water, while capillary water was notably consumed. After mold removal, the rate of chemically bound water increase slowed, while interlayer water, gel water, and capillary water evaporated significantly, with gel water comprising 87.27 % and 83.51 % of the evaporated water at 40°C and 60°C, respectively. From day 1 to day 28, interlayer water, gel water, and capillary water contents decreased significantly, with reductions of up to 85.98 % at 60°C. In dry-hot environments, moisture primarily exists as chemically bound water and gel water, contrasting with standard curing conditions where capillary water is also present. The study concludes that drying of C-S-H gels leads to both positive effects, such as interlayer space compression and increased indentation modulus, and negative effects, including increased microporosity and reduced matric densification, ultimately contributing to the deterioration of long-term mechanical properties.

DECOMPOSITION AND DELAYED FORMATION OF ETTRINGITE IN SHRINKAGE-COMPENSATING MASSIVE CONCRETE

PRFCONDITIONS OF THE HARMFUL EFFECT INDUCED BY DELAYED ETTRINGITE FORMATION IN MASSIVE SHRINKAGE-COMPENSATING CONCRETE

The Effect of Expansive Agent and Possibility of Delayed Ettringite Formation in Shrinkage-Compensating Massive Concrete

The Semiquantitative Determination and Morphology of Ettringite in Pastes Containing Expansive Agent Cured in Elevated Temperature

The Early-Age Drying Shrinkage of Cement-Based Materials with the Same Workability after Temperature Compensation

Development of Internal Moisture Transfer and Cumulative Residual Strain in Concrete under Freeze-Thaw Cycles

Concrete Thermal Cracking Analysis with Cement Hydration Model and Equivalent Age Method

Experimental study on dynamic behavior of concrete at elevated temperatures

Experimental study on early shrinkage and later expansion of concrete under a simulated geothermal environment

The Effect of Curing Temperature on the Properties of Shrinkage-Compensated Binder

Numerical Analysis of Drying Shrinkage in Long Reinforced Concrete Structure

Influence of Flexural Loading on Chloride Ingress in Concrete Subjected to Cyclic Drying-Wetting Condition

Temperature-Dependent Coefficient of Thermal Expansion of Concrete in Freezing Process

Hydration and Expansion Properties of Shrinkage-Compensating Composite Cementitious Materials

Early Age Properties and Cracking Control of Concrete

Property of Water-Reducing and Crystallization on Superplasticize of the Concrete

Hydration and pore structure characteristics of concrete incorporating internal curing materials in a dry and large-temperature-difference environment

Effect of Working Temperature Conditions on the Autogenous Deformation of High-Performance Concrete Mixed with MgO Expansive Agent

Development And Design Of Composite Cementitious Material At Long-Time Circular Elevated Temperature In Metallurgy Environment

INFLUENCE OF TEMPERATURE ON THE HYDRATION HEAT EVOLUTION OF SHRINK-AGE-COMPENSATING COMPLEX BINDERS

Time-varying moisture characteristics and C-S-H gel properties of concrete in dry and hot environments