Abstract:The addition of expansive agents could overcome the main disadvantages of raw concrete including high brittleness and low tensile strength. Few studies have investigated the early hydration kinetics of expansive cementitious binders, though the findings from the early hydration kinetics are helpful for understanding their technical performances. In this study, mixtures of 3CaO•3Al2O3•CaSO4 and CaSO4 (i.e., ZY-type™ expansive agent) with different proportions of mineral admixtures (e.g., fly ash and slag) were added into cement pastes to investigate the early hydration kinetics mechanism of expansive cementitious binders. Early hydration heat evolution rate and cumulative hydration heat were measured by isothermal calorimeter. Kinetic parameters were estimated based on the Krstulovic–Dabic model and Knudsen equations. Mechanical performances of expansive cementitious binders were tested in order to evaluate if they met the basic requirements of shrinkage-compensating materials in technical use. The early hydration heat released from cementitious binders containing ZY-type™ expansive agent was much greater than that released by pure cement, supporting the idea that addition of the expansive agent would improve the reaction of cement. The early hydration kinetic rates were decreased due to the reactions of the mineral admixture (e.g., fly ash or slag) and the ZY-type™ expansive agent in the cement system. The hydration reaction of cementitious binders containing ZY-type™ expansive agent obeyed the Krstulovic–Dabic model well. Three processes are involved in the hydration reaction of cementitious binders containing ZY-type™ expansive agent. These are nucleation and crystal growth (NG), interactions at phase boundaries (I), and diffusion (D). The 14-day expansion rates of cementitious binders containing ZY-type™ expansive agent are in the range of 2.0 × 10−4 to 3.5 × 10−4, which could meet the basic requirements of anti-cracking performances in technical use according to Chinese industry standard JGJ/T 178-2009. This study could provide an insight into understanding the effects of expansive agents on the hydration and mechanical performances of cementitious binders.

Hydration and Expansion Properties of Shrinkage-Compensating Composite Cementitious Materials

Influence of Mineral Admixtures on early Shrinkage of Ordinary Concrete

The Early-Age Drying Shrinkage of Cement-Based Materials with the Same Workability after Temperature Compensation

Autogenous shrinkage of shrinkage-compensating concrete

Influence of Superplasticiser on Early Shrinkage and Total Shrinkage of Concrete

Impact of High-Performance Expansion and Shrinkage-Reducing Agents on the Mechanical Properties and Shrinkage Compensation of High-Strength Concrete

The Assessment of Expansion Performance of Expansive Agent in Composite Cementitious Materials and Its Mix Design

Understanding the Shrinkage Compensating Ability of Type K Expansive Agent in Concrete

Influences of Water-binder Ratio and Dosage of Fly Ash on Autogeneous Shrinkage of Shrinkage-Compensating Concrete

Experimental study on early shrinkage and later expansion of concrete under a simulated geothermal environment

Influence of Fly Ash on the Deformation of Shrinkage-compensating Concrete with the Same Level of Strength

The Influence of the Hydration Procedure of MgO Expansive Agent on the Expansive Behavior of Shrinkage-Compensating Mortar

Effect of sodium sulfate and gypsum on performances of expansive grouting material with aluminum as expansion agent

Effects of Expansive Agents on the Early Hydration Kinetics of Cementitious Binders.

The Effect of Expansive Agent and Possibility of Delayed Ettringite Formation in Shrinkage-Compensating Massive Concrete

Restraining Shrinkage and Crack of Concrete by Using of Expansive Agent

Investigation of Crack Control of Underground Concrete Structure with Expansive Additives

Influence of an over calcined calcium oxide-based shrinkage-compensating admixture on some properties of a self-compacting concrete

Effects of Shrinkage Reducing Agent and Expansive Admixture on the Volume Deformation of Ultrahigh Performance Concrete

Humidity Sensitivity of Hydration of Expansive Agent and Its Expansive Efficiency in Ultra-High Performance Concrete

Development and Evaluation of Physical and Mechanical Properties of Alkali-Activated Multi-Component Composite Grouting Materials