Abstract:A large number of binder ingredients such as cement and active mineral admixtures are used in the preparation of high-strength concrete, and the water:binder ratio is extremely low. This leads to a large amount of shrinkage of concrete at the early stage of curing, which poses a great threat to the safety and durability of the structure. To solve the cracking problem of high-strength concrete induced by high shrinkage, we choose to change the admixture to solve it. In this study, a high-performance expansion agent (HPEA) and shrinkage-reducing agent, which are currently studied in a small number, were selected by changing the way of admixture, and their effects on the strength and shrinkage of high-strength concrete were compared and analyzed. The results show that the addition of a HPEA is beneficial to the compressive strength of concrete and sufficient expansion can be obtained by using a high amount of HPEA, but there is an excessive and delayed expansion to produce cracks in the later stage. A shrinkage-reducing agent plays an adverse role in the development of concrete strength, but it performs better in inhibiting shrinkage. The combination of a HPEA and shrinkage reducing agent can largely avoid the formation of cracks, and the two have a certain synergy. The main reason is that a HPEA compensates for some of the negative effects of a shrinkage-reducing agent on concrete strength, and the shrinkage-reducing agent further strengthens the inhibition effect of a HPEA on concrete shrinkage, and to some extent avoids the risk of cracks caused by delayed expansion caused by admixture problems.

Autogenous shrinkage of shrinkage-compensating concrete

Influences of Water-binder Ratio and Dosage of Fly Ash on Autogeneous Shrinkage of Shrinkage-Compensating Concrete

Influence of Mineral Admixtures on early Shrinkage of Ordinary Concrete

Hydration and Expansion Properties of Shrinkage-Compensating Composite Cementitious Materials

The Early-Age Drying Shrinkage of Cement-Based Materials with the Same Workability after Temperature Compensation

Influence of Superplasticiser on Early Shrinkage and Total Shrinkage of Concrete

THE AUTOGENOUS SHRINKAGE OF CONCRETES PREPARED WITH THE BINDERS CONTAINING DIFFERENT KINDS OF MINERAL ADMIXTURE

Effect of Supplementary Materials on the Autogenous Shrinkage of Cement Paste

Influence of Shrinkage Retarder on Early Self-Shrinking of Concrete

Influence of Fly Ash on the Deformation of Shrinkage-compensating Concrete with the Same Level of Strength

Understanding the Shrinkage Compensating Ability of Type K Expansive Agent in Concrete

Impact of High-Performance Expansion and Shrinkage-Reducing Agents on the Mechanical Properties and Shrinkage Compensation of High-Strength Concrete

Experimental and numerical study on the mitigation of autogenous shrinkage of cementitious material

Effects of Admixtures and SRA on Early Age Shrinkage of Concrete

Numerical study of the autogenous shrinkage of cement pastes with supplementary cementitious materials based on solidification theory

Design and Control Shrinkage Behavior of High-Strength Self-Consolidating Concrete Using Shrinkage-Reducing Admixture and Super-Absorbent Polymer

Effects of Shrinkage Reducing Agent and Expansive Admixture on the Volume Deformation of Ultrahigh Performance Concrete

Shrinkage of blended cement concrete with fly ash or limestone calcined clay

Autogenous shrinkage of alkali-activated slag: A critical review

Effect of Activator and Mineral Admixtures on the Autogenous Shrinkage of Alkali-Activated Slag/Fly Ash

Influence of an over calcined calcium oxide-based shrinkage-compensating admixture on some properties of a self-compacting concrete