Abstract:In a self-aligned double polysilicon bipolar junction transistor (BJT) process, the emitter window is opened by etching through the base polysilicon. The etch always penetrates a certain depth (overetch depth) into the upper epitaxial layer of the silicon substrate. Experimental results, confirmed by process and device simulation, show that the cut-off frequency fT increases with overetch depth. According to the simulation, the increase in fT is a consequence of a shorter base width along the perimeter of the intrinsic base. The base shortening results from the weakened electrical link between the extrinsic and intrinsic base which in turn is caused by the emitter window overetch. It is found that the fT dependence upon overetch depth is stronger for 7° than for 0° wafer tilt during the intrinsic base ion implantation. During the implantation with a 7° tilt, the emitter window sidewalls lead to the formation of an even shorter base width along part of the perimeter of the intrinsic base. However, excessive emitter window overetch degrades the BJT performance in general, resulting in high collector leakage current, low emitter-to-collector breakdown voltage and low maximum oscillation frequency (fMAX). The simulation results also demonstrate that the effect of emitter overetch and base implantation tilt will be more severe when the BJT is scaled down to deep-submicron dimensions.

The Effect of Emitter Overetch and Base Implantation Tilt on the Performance of Double Polysilicon Bipolar Transistors

Suppression of Parasitic Jfet Effect in Trench Igbts by Using A Self-Aligned P Base Process

The Influence on Electrical Performance of Double-Polysilicon Bipolar Transistors by Forming Gas Annealing

A Physical Model of Floating Body Effects in Polysilicon Thin Film Transistors

Influence of In-Situ Arsenic Doped Emitter Poly Process Conditions on RF-BiCMOS Device Parametrics

Performance of a bipolar single electron device

Very High Speed Poly-Si Emitter Bipolar Transistor and Circuit

Emitter-base short issue study and improvement in a low cost and high performance 0.18um SiGe BiCMOS process

The effect of hydrogen passivation on electrical characteristics of double-polysilicon self-aligned bipolar transistors

Arrier Transport and Emitter Transit Lysilicon Emitter Bipular Transistors

High-speed Polysilicon Emitter Bipolar Technologies

A Simplified High-Speed Bipolar Process with Ti Salicide Metallization: Implementation of in Situ P-Doped Polysilicon Emitter

Very high speed polysilicon emitter bipolar transistor and circuit

Origin of Current Variations in Ultrathin Bipolar Junction Transistors Under Bending Stress

Emitter Size Effect in 4H-Sic BJT

Impact of Gate Coupling and Misalignment on Performance of Double-gate Organic Thin Film Transistors

Collector compensative ion-implantation technology for polysilicon emitter transistors

Effects of Substrate Bias on Low-Frequency Noise in Lateral Bipolar Transistors Fabricated on Silicon-on-Insulator Substrate

The Influence of the Collector Design on the F>inf<max>/inf<vs. F>inf<t>/inf<characteristics for Different Types of Si-based RF Bipolar Transistors

Impacts of Vertically Stacked Monolithic 3D-IC Process on Characteristics of Underlying Thin-Film Transistor

Effect of emitter-base spacer design on the performance of InP/GaAsSb/InP DHBTs grown by MOCVD