Abstract:Sputtered Cu/Si thin films were experimentally prepared at different sputtering pressures and characterized using X-ray diffraction (XRD) and an atomic force microscope (AFM). Simultaneously, an application-oriented simulation approach for magnetron sputtering deposition was proposed in this work. In this integrated multiscale simulation, the sputtered atom transport was modeled using the Monte Carlo (MC) and molecular dynamics (MD) coupling method, and the deposition of sputtered atoms was simulated using the MD method. This application-oriented simulation approach was used to simulate the growth of Cu/Si(100) thin films at different sputtering pressures. The experimental results unveiled that, as the sputtering pressure decreased from 2 to 0.15 Pa, the surface roughness of Cu thin films gradually decreased; (111)-oriented grains were dominant in Cu thin films and the crystal quality of the Cu thin film was gradually improved. The simulation results were consistent with the experimental characterization results. The simulation results revealed that the transformation of the film growth mode from the Volmer-Weber growth mode to the two-dimensional layered growth mode resulted in a decrease in the surface roughness of Cu thin films; the increase in the amorphous compound CuSix and the hcp copper silicide with the decrease in the sputtering pressure was responsible for the improvement of the crystal quality of the Cu thin film. This work proposed a more realistic, integrated simulation scheme for magnetron sputtering deposition, providing theoretical guidance for the efficient preparation of high-quality sputtered films.

Microstructure of nano-laminated SiC/W film grown by magnetron sputtering

MICROSTRUCTURE AND STRESS PROPERTIES OF RADIO FREQUENCY MAGNETRON SPUTTERING MgF2 FILMS WITH DIFFERENT THICKNESSES

Microstructure Evolution in Magnetron-Sputtered WC/SiC Multilayers with Varied WC Layer Thicknesses

Microstructures of Ge-dots/Si Multilayered Structures Fabricated by Ni-induced Lateral Crystallization

Microstructure and Mechanical Properties of Carbon Nitride Multilayer Films Deposited by DC Magnetron Sputtering

Asymmetric Interface and Growth Mechanism in Sputtered W/Si and WSi2/Si Multilayers

Microstructure and texture of polycrystalline 3C–SiC thick films characterized via EBSD

Growth and Interface Structures of Zr/Nb Films and Si(110) Substrate

Effects of C/Si ratios on structures and behaviors of NbSiCN nanocomposite films synthesized by reactive magnetron sputtering

Microstructure, mechanical and high-temperature tribological properties of amorphous SiC films by pulsed magnetron sputtering

Influence of micron and nano SiCp on microstructure evolution and mechanical properties of laser metal deposition AlSi10Mg alloy

In situ growth of c-axis-oriented La2/3Sr1/3MnO3−δ thin films on Si(001)

Evolutions of the Microstructure and Properties of the (CrMoNbTaZr)NX Films Prepared by Reactive Magnetron Sputtering: Effects of Stoichiometry and Crystallinity

On the Microcrystal Structure of Sputtered Cu Films Deposited on Si(100) Surfaces: Experiment and Integrated Multiscale Simulation

Influence of radio frequency magnetron sputtering parameters on the structure and performance of SiC films

Microstructure Characterization of Oxidized Nanocrystalline Si:H Film by Transmission Electron Microscopy

Individual Layer Thickness Dependence of Microstructure and Mechanical Properties of Magnetron Sputtering Mo-W-Doped Ni/Ni3Al Multilayers

Microstructure, mechanical and tribological properties of CrN/W2N multilayer films deposited by DC magnetron sputtering

Effects of Si Surficial Structure on Transport Properties of La 2/3 Sr 1/3 MnO 3 Films

Interlayer Microstructure of Sputtered Mo/Si Multilayers

The Microstructure and Magnetic Properties of Co2MnSi Thin Films Deposited on Si Substrate