Abstract:Surface acidity and redox ability are critical factors affecting the NH3 and NO adsorption-activation in the selective catalytic reduction of NO x with NH3 (NH3-SCR). Herein, Cu y Ni3- y AlO x (y represents the Cu/Al ratio) mixed oxides with highly dispersed Ni-Cu dual active sites were constructed from the layered double hydroxide precursors to optimize the acidity and redox ability. Compared with other Cu y Ni3- y AlO x (<80%), Cu1.5Ni1.5AlO x delivered a NO x conversion as high as 90% at 200 °C. Moreover, Cu1.5Ni1.5AlO x possessed superior N2 selectivity (92% above 200 °C), catalytic stability (64 h), and H2O and SO2 resistance. Characterization demonstrated that Cu and Ni species in Cu y Ni3- y AlO x had interactions, and the interactions were derived from the electron transfer and influenced by the Ni/Cu ratio, inducing the formation of highly dispersed Ni–Cu sites. Cu1.5Ni1.5AlO x with a Ni/Cu ratio of 1 achieved the strongest interaction. That interaction could inhibit nanosheet agglomeration, increase surface acidity, and improve low-temperature reducibility, in favor of NH3 and NO adsorption/activation. It was discovered that the Ni–Cu sites participated in the NO and O2 activation, respectively, and accounted for the NH3 adsorption-activation, synergistically. More active intermediates (NH3/NH4 +, bridging/bidentate nitrate) were produced by Langmuir-Hinshelwood and Eley-Rideal mechanisms over Cu1.5Ni1.5AlO x . This study offered light on fabricating effective functionalized active sites to promote NH3-SCR performance.

Catalytic reduction of NO on the catalysts supported on activated carbon fibers. II. Nickel-series catalysts

Tailoring the Proceeding of the NH3-SCO and NH3-SCR Reactions over FeOx Catalysts by Modifying with NbOx

Effect of Nitric Acid Pretreatment on the Properties of Activated Carbon and Supported Palladium Catalysts

The Role of Surface Properties of Activated Carbon in the Catalytic Reduction of NO by Carbon

Catalytic Oxidation of NO at Room Temperature by Pitch-Based Activated Carbon Fibers

Effect of Nitrogen Doping on the Reduction of Nitric Oxide with Activated Carbon in the Presence of Oxygen

Preparation of Pitch-based Activated Carbon Fibers and Their Catalytic Oxidation Performance for NO

Nitrogen Doping of Activated Carbon Loading Fe2O3 and Activity in Carbon-Nitric Oxide Reaction

[Reaction of NO with metal oxides and urea supported on activated carbons at low temperature]

Selective catalytic reduction of NO with NH3 over CuOX-carbonaceous materials

Activation of Fast Selective Catalytic Reduction of NO by NH3 at Low Temperature over TiO2 Modified CuOX-CeOX Composites

Catalytic Reduction of NO with NH 3 over V 2 O 5 -MnO X /TiO 2 -Carbon Nanotube Composites

Micro-structured Cu-ZSM-5 catalyst on aluminum microfibers for selective catalytic reduction of NO by ammonia

Catalytically oxidation of NO into NO2 at room temperature by graphitized porous nanofibers

Low temperature SCR denitration with NH3 by highly dispersed Ni–Cu Sites: An insight into surface acidity and redox ability

Nitrogen-Doped Pitch-Based Activated Carbon Fibers with Multi-Dimensional Metal Nanoparticle Distribution for the Effective Removal of NO

Low Temperature Selective Catalytic Reduction of NO and NO2 with NH3 over Activated Carbon-Supported Vanadium Oxide Catalyst

Selective catalytic reduction of NOx with NH3 by monolithic catalyst MnOx/AC/C under low temperature in the presence of excess O2

Simultaneous removal of NO x and SO 2 by low-temperature selective catalytic reduction over modified activated carbon catalysts

Effect of pre-oxidation process on V2O5/AC catalyst for the selective catalytic reduction of NOx with NH3

Selective Catalytic Reduction Of Nox With Nh3 At Low Temperatures Over Metal Oxide Supported On Ac-C Cellular Monoliths