Abstract:A hydrothermal method was employed to synthesize the precursor of nano-zirconium carbide, which was subsequently heat treated at high temperatures under vacuum to obtain finely dispersed nanometer-sized zirconium carbide powder through a carbothermic reduction reaction. Scanning Electron Microscopy (SEM) was utilized to examine the microstructure of the precursors obtained under different hydrothermal conditions and carbon contents. The effects of different heat treatment temperatures on the microstructure of the products were analyzed. Transmission Electron Microscopy (TEM) confirmed the boundary coating structure of the hydrothermal precursor and provided insights into the phase structure of the nanometer-sized zirconium carbide. The reaction mechanism and temperature involved in the carbothermic reaction process were determined through calculations. Furthermore, the energy, phase and microstructure of the reaction were investigated using Thermogravimetric Analysis (TG-DSC) and X-ray Diffraction (XRD) at different temperatures. The obtained results revealed that the zirconium carbide precursor was synthesized via the hydrothermal method exhibited a coreshell structure with a boundary coating, which not only ensured uniform contact between C and ZrO2 particles but also facilitated the formation of zirconium carbide. The results show that the most suitable process parameters are Zr/C 1: 7, 240 degrees C and 24 h. The thermodynamic calculation results show that ZrO2 combines with carbon to form CO and ZrC when the temperature reaches 1656.56 degrees C. As the temperature rises, CO reacts with ZrO2 to form ZrC and CO2. TG-DSC shows that the carbothermal reduction reaction starts at 1100 degrees C and reaches its peak at 1418 degrees C. XRD analysis confirms that when the temperature reached 1450 degrees C ZrC appeared. At 1600 degrees C, the phase transition of ZrC is basically completed. TEM images showed that the synthesized zirconium carbide particles were about 30 nm.

Synthesis, Characterization and Ceramization of A Carbon-Rich Zirconium-Containing Precursor for Zrc Ceramic

Synthesis and properties of the ceramic precursor containing zirconium and alkyne

Carbothermal synthesis of zirconium carbide hollow microspheres from polyzirconoxane and phenolic resin by spray drying

Synthesis and Properties of Zirconium-Acetylene Hybrid Resin

Preparation and Properties of New Zirconium-Containing Silylacetylene Precursor for Ceramic Material

Synthesis and Pyrolysis Evolution of Glucose-Derived Hydrothermal Precursor for Nanosized Zirconium Carbide

Preparation and Characterization of Zirconium Carbide Nano Powder by Hydrothermal and Carbothermal Reduction Methods

Pitch resin addition induced evolution of composition, microstructure and mechanical property of C/C-SiC-ZrC composites

Preparation of (Ti0.2Zr0.2Hf0.2Nb0.2Ta0.2)C high‐entropy ceramic nanopowders via liquid‐phase precursor

Carbothermal Synthesis of Ultra-Fine Zirconium Carbide Powders Using Inorganic Precursors Via Sol–gel Method

Effects of Zr on the Precursor Architecture and High-Temperature Nanostructure Evolution of Sioc Polymer-Derived Ceramics

Preparation and property characterization of Zr-modified Si-O-C-based precursor ceramics through three-dimensional printing

Preceramic Polymer As Precursor for Near‐stoichiometric Silicon Carbon with High Ceramic Yield

Microstructure Analysis of Zirconium Carbide Layer on Pyrocarbon-Coated Particles Prepared by Zirconium Chloride Vapor Method

Preparation and Stereolithography of SiC Ceramic Precursor with High Photosensitivity and Ceramic Yield

A Novel Zirconium Modified Arylacetylene Resin: Preparation, Thermal Properties and Ceramifiable Mechanism

Microstructure and Mechanical Properties of ZrC Coating on Zirconium Fabricated by Interstitial Carburization

Properties and ceramic transformation of Si–Zr–O–C precursor ceramics with porous structure

The Preparation of Cf/ SiC-ZrC Composite Material by Adding SiC and ZrC Powders in Organic Precursors

Microstructure and phase evolution behavior of SiZrBC ceramic precursors synthesized via sol–gel method

Co-precipitation Synthesis and Thermal Stability of Zircon Encapsulated Carbon Black