Abstract:Immediate implant placement (IIP) has garnered significant attention due to its minimally invasive approach and ability to facilitate immediate crown replacement. Nevertheless, challenges persist in processing complex geometries and selecting suitable materials. This study successfully fabricated high-performance, complex-structured (Ce, Y)-TZP-based composite ceramics using vat photopolymerization (VPP) technology, combining second-phase strengthening and grain boundary segregation effects. The incorporation of α-Al 2 O 3 as a secondary phase led to a progressive refinement of (Ce, Y)-TZP grains, with the most favorable grain size achieved at 20 wt% α-Al 2 O 3 , reducing the average grain size to 0.75 μm. However, excessive α-Al 2 O 3 content resulted in micropore formation, compromising the material's mechanical performance. At an optimal concentration of 15 wt% α-Al 2 O 3 , the composite exhibited superior mechanical properties, including a Vickers hardness of 11.53 ± 0.27 GPa and a flexural strength of 525.5 ± 21.3 MPa. Despite these improvements, some coarse (Ce, Y)-TZP grains persisted within the ceramic matrix. To further enhance grain refinement at lower α-Al 2 O 3 content, a minimal addition of La 3+ (0.1 wt%) was introduced, promoting grain boundary segregation and additional grain refinement. This modification reduced the (Ce, Y)-TZP grain size to 0.74 μm, increased hardness to 13.03 ± 0.31 GPa, and elevated flexural strength to 550.4 ± 39.8 MPa, while maintaining excellent material stability.

Preparation of machinable Ce–TZP/CePO4 composite ceramics by liquid precursor infiltration

Preparation of CePO4-coated Zirconia Ceramics and Their Mechanical Behavior

Fabrication of Three-Dimensional Inter-Connective Porous Ceramics Via Ceramic Green Machining and Bonding

Preparation of Cepo4 Modified Zro2 Ceramics with Different Particle Sizes and Their Mechanical Behaviors

Machinability of Poly(methyl Methacrylate) Infiltrated Zirconia Hybrid Composites

Preparation of (Ti0.2Zr0.2Hf0.2Nb0.2Ta0.2)C high‐entropy ceramic nanopowders via liquid‐phase precursor

Architectural Engineering Inspired Method of Preparing C-f/ZrC-SiC with Graceful Mechanical Responses

Grain Size Refinement of Additive Manufactured Ce-TZP Ceramics by Coupled Two-Step Pre-Sintering and HIP

Machinable Ceramic Graded Composites

Second Phase Strengthening and Grain Boundary Segregation Effects on the Microstructure and Properties of (Ce, Y)-TZP-Based Ceramics Prepared by Vat Photopolymerization

Efficient fabrication and properties of 2D Cf/(Ti0.2Zr0.2Hf0.2Nb0.2Ta0.2)C-SiC high-entropy ceramic matrix composites via slurry infiltration lamination combined with precursor infiltration and pyrolysis

Stronger and Tougher Nanosized Dense Ceria-Doped Tetragonal Zirconia Polycrystals by Sinter-Hip

Preparation and properties of high-porosity ZrB2-SiC ceramics by water-based freeze casting

Preparation and Characterization of Fibrous Alumina and Zirconia Toughened Alumina Ceramics with Gradient Porosity

Microstructure and Mechanical Properties of Ce-Y-TZP Ceramic Composites for Ceramic Plunger and Ball Valve

Properties and microstructure of machinable Al2O3/LaPO4 ceramic composites

Study on milling performances of 3Y-TZP ceramics using PCD and PCBN tools

Preparation of Porous Spodumene/zircon Composite Ceramics and Its Thermal and Mechanical Properties

Fabrication and Mechanical Properties of Homogeneous Zirconia Toughened Alumina Ceramics Via Cyclic Solution Infiltration and in Situ Precipitation

Using flexible hydrothermal carbon-coated continuous carbon fiber to fabricate Cf/ZrB2-SiC composites by fused deposition modeling and precursor infiltration pyrolysis

The preparation of laminated ceramic composites by sedimentation and sieving