Abstract:Hybrid polymer composites have become the interest of the world, especially in mechanical and electronic applications. Recently, advanced machining techniques such as abrasive water jet machining of hybrid polymer composites have been used to solve many problems including the ability to form complex shapes, high performance, better surface features, and high levels of accuracy. In this study, the effect of ceramic particle (SiC and Al 2 O 3 ) constituents on the mechanical properties and machinability of the hybrid polymer composites was investigated. The results of mechanical tests showed that an improvement in the tensile and flexural properties appeared using a hybrid polymer constituent (70 wt% Epoxy + 15 wt% CF + 10 wt% Sic + 5 wt% Al 2 O 3 ). However, this hybrid polymer constituent includes the lowest value of impact strength. Also, the morphological analysis indicated the uniform distribution of particles, the best defect-free surface, and the bonding strength between the reinforcement and the epoxy matrix can be obtained using this constituent which has contributed to the improvement of the mechanical properties. The abrasive water jet automation process was also performed based on the design of experiment (Taguchi L 18 design) to study the machinability the hybrid polymer composites in terms of surface roughness, hardness, and kerf width. The analysis of variance concluded that the constituent (70 wt% Epoxy + 15 wt% CF + 10 wt% Sic + 5 wt% Al 2 O 3 ) has the most influential factor on the machinability of the hybrid polymer composite followed by traverse velocity, and then stand of distance that used during abrasive water jet machining. Moreover, the grey relational analysis was beneficially used to determine the multi-optimization of abrasive water jet machining parameters.

Machinable Ceramic Graded Composites

Graded Machinable Si3N4/h-BN and Al2O3/LaPO4 Ceramic Composites

Research of the Grinding Force and Surface Morphology of Fiber-Reinforced Ceramic Matrix Composite

Machinable ceramics and its graded design

Design, Fabrication and Characterization of Machinable Al<sub>2</sub>O<sub>3</sub>/LaPO<sub>4</sub> Functionally Graded Materials

Fabrication and properties of machinable Al2O3/LaPO4 composites and FGMs

Fabrication of Three-Dimensional Inter-Connective Porous Ceramics Via Ceramic Green Machining and Bonding

Fabrication and characterization of machinable Si3N4/h-BN functionally graded materials

A Study on Grinding Surface Waviness of Woven Ceramic Matrix Composites

Farbrication and Properties of Machinable Al<sub>2</sub>O<sub>3</sub>/LaPO<sub>4</sub> Composites and FGMs

Reinforcement mechanisms and optimum design of laminated ceramic composites

Investigation of the physical and mechanical properties of hot-pressed machinable Si3N4/h-BN composites and FGM

Properties and microstructure of machinable Al2O3/LaPO4 ceramic composites

A Review on Machining SiCp/Al Composite Materials

Role of ceramics in machining of composite materials: A comprehensive review

Design and manufacture of near-net-shape metal-ceramic composites with gradient-layered structure and optimized damage tolerance

Influence of Ceramic Particles Additives on the Mechanical Properties and Machinability of Carbon Fiber/Polymer Composites

A review on machining of carbon fiber reinforced ceramic matrix composites

Grinding Characteristics and Surface Roughness Modeling of 2.5D Woven SiCf/SiC Ceramic Matrix Composites

Design and Fabrication of Machinable Al<sub>2</sub>O<sub>3</sub>/h-BN Composites and FGMs

Review on Abrasive Machining Technology of SiC Ceramic Composites