Abstract:Customized porous Al2O3-ZrO2-mullite composites were designed and prepared by reaction sintering of zircon (ZrSiO4) and alumina (Al2O3) at sintering temperatures from 1400 to 1600 °C for 3 h. The mechanical properties, microstructural evolution, and reaction mechanisms of the composites were investigated. The reactions between ZrSiO4 and Al2O3 were studied by X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy dispersive X-ray spectrometer (EDS). The results indicate that ZrSiO4 and Al2O3 react and form ZrO2 and mullite. Sintering temperature has an important effect on the reaction process. At 1400 °C, Al2O3 reacts directly with SiO2 of ZrSiO4 to form mullite and ZrO2, which reduces the decomposition temperature of ZrSiO4 and promotes the decomposition of ZrSiO4. However, at 1600 °C, ZrSiO4 first decomposes to form SiO2 and ZrO2, and then generates mullite by the diffusion of Si. The migration of Si is the key factor for the formation of mullite. The thermal shock resistance of the composites can be significantly improved by phase transformation toughening of in-situ ZrO2. Therefore, increasing the proportion of ZrSiO4 can significantly improve the mechanical properties of sample. The residual ratio of the flexural strength after thermal shock exceeded 90%, when the mass ratio of ZrSiO4 to Al2O3 was 3:1. Besides, the addition of polymethyl methacrylate could improve the porosity of materials and has a direct effect on the thermal conductivity of composites.

Preparation of Porous Spodumene/zircon Composite Ceramics and Its Thermal and Mechanical Properties

Thermal and mechanical properties of porous Y-PSZ/zircon composites

Study on the Synthesis and Properties of Zirconia Based Metal Ceramics by Spark Plasma Sintering

Preparation and Properties of ZrB2-SiC Porous Ceramics by Spark Plasma Sintering

Fabrication and Properties of Porous Yttria-Stabilized Zirconia Ceramics

Effects of porosity and pore size on mechanical and thermal properties as well as thermal shock fracture resistance of porous ZrB2–SiC ceramics

Preparation of Nano-Composite ZTM Ceramics of High Mechanical Properties by In-Situ Crystallization of Amorphous Bodies

Preparation and Properties of Porous ZTM Ceramics

Preparation and Performance for Zirconia/Alumina Composite Ceramics

Zirconia-Mullite Obtained from Co-Precipitated Zirconia-Mullite Composite Powders by Sps

Preparation and properties of high-porosity ZrB2-SiC ceramics by water-based freeze casting

In Vitro Cell Proliferation and Mechanical Behaviors Observed in Porous Zirconia Ceramics.

Reaction mechanisms and properties of in situ porous Al2O3-ZrO2-mullite composites

Nano-Zirconia/Mullite Composite Ceramics Prepared By In-Situ Controlled Crystallization From The Si-Al-Zr-O Amorphous Bulk

Microstructure and mechanical properties of a porous ceramic composite with needle‐like mullite and zirconia

Fabrication of Porous C-f/ZrO2 Ceramic Matrix Composite

Preparation and Mechanical Properties of Fine Grain Al2O3-ZrO2 Composite Ceramics

Preparation of Highly Porous ZrB2/ZrC/SiC Composite Monoliths Using Liquid Precursors Via Direct Drying Process

Mechanical Properties and Structure of Zirconia-Mullite Ceramics Prepared by In-Situ Controlled Crystallization of Si-Al-Zr-O Amorphous Bulk

Preparation and Properties of Porous Silicon Carbide Ceramics Through Coat-Mix and Composite Additives Process

Preparation and thermal shock resistance investigation of ZTA-La 2 O 3 composite ceramics for porous medium combustion materials