Abstract:On the basis of previous experimental studies of two-phase flow condensation heat transfer for R134a inside the horizontal micro-fin tubes, a theoretically analysis of heat transfer characteristic combining both heat transfer mechanism and flow mechanism is discussed by the experimental data of heat transfer coefficient and pressure drop, to further clarify the influence of experimental condition and tube structure on heat transfer characteristics under the special working condition. Two performance factors, enhancement factor (EF) and penalty factor (PF), are introduced to quantitatively compare the effect of micro-fin on the heat transfer coefficient and the pressure drop between enhance tube and smooth tube. Meanwhile, the comprehensive factor, CHF, is applied to evaluate the comprehensive performance of heat transfer tube. It was found that enhancement factor (EF) and penalty factor (PF) both increase with increasing mass flux and fin helical angle, and decreasing saturation temperature, the comprehensive factor, CHF, is always greater than one and increases with increasing fin helical angle and mass flux, and decreasing saturation temperature. Moreover, based on the comparative analysis findings that some existing correlations of heat transfer characteristics underestimate most of the experimental data, and the experimental variable has great influences on the correlation prediction accuracy, such as mass flux, which is proportionate to the prediction deviation of correlation. Therefore, a new correlation was developed through analyzing quantitatively influencing mechanism of the experimental variable on the heat transfer characteristics, in a way that a two-phase frictional multiplier is defined firstly from the experimental data and then the forced convection heat transfer mechanism is redefined based on the comprehensive effect of various experimental variables. By the experimental data verification, the new correlation shows good prediction effect with the mean deviation of less than 5%.

Experimental Study on Heat Transfer Boundary Conditions for Steel Hot Extrusion Process

Investigation on heat transfer coefficient of glass lubricated interface between P92 heat-resistant steel and H13 steel

Lubrication Behavior of the Glass Lubricated Hot Extrusion Process

Boundary Parameters During Glass Lubricated Hot Extrusion of Steel Pipes

Glass Lubrication Technology in Steel Hot Extrusion

Research methods and influencing factors of interfacial heat transfer during sub-rapid solidification process of strip casting

Analysis of breakthrough extrusion pressure for large scale steel pipe

Development of Estimation Procedure of Contact Heat Transfer Coefficient at the Part–Tool Interface in Hot Stamping Process

Experimental and Numerical Study on Friction and Wear Performance of Hot Extrusion Die Materials

Theoretical and Experimental Analyses of Two-Phase Flow Condensation Heat Transfer Inside the Horizontal Micro-Fin Tube

Model experiments for the determination of the heat-transfer coefficient and transition thermal analysis in the direct rolling process

Experimental and modeling study of the interfacial and convective heat transfer coefficients of 6061 aluminum alloy in hot gas forming

Method for Determining the Boundary Condition of Heat Transfer in Mold for Slab Casting

A New Control Volume-Based 2d Method for Calculating the Temperature Distribution of Rod During Multi-Pass Hot Rolling

The effect of laminar cooling heat transfer coefficient on the temperature field of steel plate

Research on Holding Pressure and Cooling Process During Hot Forming of Ultra-High Strength Steel 22MnB5

Investigation of Solidification Heat Transfer in Slab Continuous Casting Process Based on Different Roll Contact Calculation Methods

An Experimental Study of the Thermal State of a Steel Billet during Hot Rolling

Analysis of Temperature and Heat Partitioning Coefficient During Friction Between Polymer and Steel

A Study on the Heat Transfer Characteristics of Steel Plate in the Matrix Laminar Cooling Process

Numerical simulation and optimization of steel tube billet heating process in rotary hearth furnace using CFD