Abstract:<p>For a heat treatment furnace, the precise study of the flow characteristics, combustion and heat transfer in the furnace is essential to know the temperature distribution in a slab during the heating process. In this context several different three-dimensional CFD (Computational Fluid Dynamics) models have been developed to simulate the combustion and heat transfer process in the furnace. These models were developed based on direct fired reheating furnaces with continuous fuel input. In this paper, a novel three-dimensional transient CFD model used to investigate the slab heating characteristics in the heat treatment furnace with pulse combustion was developed. The transient calculation in the furnace was performed based on the steady-state simulation of the furnace temperature, and the movement of slabs on the rollers in the furnace was simulated using dynamic mesh. By comparison, the results from the EDC with two different reaction mechanisms showed good consistency. However, the EDC with the two-step reaction mechanism required one fifth the calculation time of the EDC with the GRI-Mech3.0, and was thus the preferred model. In contrast to direct fired reheating furnaces, the outer radiant tube walls were treated as the coupled boundary conditions in the model to realize indirect heat transfer between the process gas in the furnace and the combustion gas in the radiant tubes. Furthermore, a pulse combustion method was proposed to control the working states of the burners based on UDF (User-Defined Function), in order to realize the pulse combustion process in the heat treatment furnace. By the validation of "Black Box", the temperature variation of the slab and the gas temperature in the furnace predicted by the model agreed well with the experimental results. The simulation revealed that the temperature distribution of the radiant tubes and furnace gas was uniform and the maximum temperature difference on the outer radiant tube walls was less than 84 K. During the slab transient heating process, the slab temperature distribution became more uniform in the soaking zone and the maximum temperature difference along the thickness of the slab was below 13 K at discharge.</p>

Numerical simulation and optimization of steel tube billet heating process in rotary hearth furnace using CFD

Study on Billet Temperature Prediction and Furnace Temperature Optimal Setting of Regenerative Reheating Furnace

Modeling approach and numerical analysis of a roller-hearth reheating furnace with radiant tubes and heating process optimization

Numerical Investigation of the Limit of Coke Rate Reduction in an Ironmaking Blast Furnace (BF)

Continuous Casting Mould for Square Steel Billet Optimised by Solidification Shrinkage Simulation

Simulation of Temperature Field in Steel Billets during Reheating in Pusher-Type Furnace by Meshless Method

Mould Taper Optimization for Continuous Casting Steels by Numerical Simulation

Numerical analysis of the heat transfer of radiant tubes and the slab heating characteristics in an industrial heat treatment furnace with pulse combustion

Numerical Simulation of Heat Transfer Phenomenon in Steel Making Ladle

Numerical Simulation of Temperature Field in Blast Furnace Gas Regenerative Furnace

Simulation and application of dynamic heat transfer model for improvement of continuous casting process

Comprehensive Numerical Modeling of Raceways in Blast Furnaces

Real-Time Heat Transfer Model Based on Variable Non-Uniform Grid for Dynamic Control of Continuous Casting Billets

Numerical Simulation on Multiple Physical Fields Behaviors in Billet Continuous Casting with Different Stirrer Positions

3D Transient Heat Transfer Simulation and Optimization for Initial Stage of Steel Continuous Casting Process

The optimization of distribution and fan parameters in heat treatment furnaces through the integration of numerical simulation and machine learning

Numerical Study on the Heat Recovery and Cooling Effect by Built-in Pipes in a Graphitization Furnace

Simulation and Control of Thermal Process in Bell-Type Annealing Furnace

CFD Modeling of Phase Change and Coke Formation in Petroleum Refining Heaters

Numerical Analysis on Erosion and Optimization of a Blast Furnace Main Trough

Numerical Simulations for the Induction Heating Process of Non-Linear Ferromagnetic Billets