Abstract:It is crucial to reveal the energy conversion and heat and mass transfer characteristics in the electric arc furnaces (EAFs). In this paper, a transient mathematical model was built to adequately capture the distribution of multi-physical fields in EAF. The numerical modeling method was verified against brown corundum smelting experiment data. In addition, the influence on the brawn corundum smelting process of the typical operating parameters has been examined, and the major problems which limit the performance improvement of smelting were analyzed. Moreover, four indicators were proposed to comprehensively evaluate the EAF performance, consisting of liquid volume fraction β, energy efficiency η, temperature rise index ς, and temperature uniformity index ξ. Furthermore, the optimal combination of operating parameters was selected automatically based on the back propagation (BP) neural network predicting model and non-domestic sorting genetic algorithm II (NSGA-II). The results showed that the local overheating phenomenon is serious and that homogenizing the energy distribution in the furnace is the key to improving the melting performance. Increasing electrode immersion and voltage can significantly increase the rate of heat and mass transfer. In the case of ψ = 0.75, υ = 0.6, when χ is increased from 0.2 to 0.6, τmax is shortened by 13.3% and ηmax is increased by 12.0%. While with ψ = 0.75 and χ = 0.4, τmax is reduced by 36.0% when υ increases from 0.2 to 1.0, but ηmax is also decreased by 7.0%. It was found that decreasing the height diameter ratio will improve the overall EAF smelting performance, but it also increases the area of heat loss. In the case of χ = 0.4, υ = 0.6, ξave and ηmax improved by 3.1 and 14.5%, respectively, when ψ decreases from 1.0 to 0.5. The EAF performances are considerably enhanced in comparison to the operating basic parameters (ψ = 0.75, χ = 0.4 and υ = 0.6), subject to optimal operation parameters (ψ = 0.61, χ = 0.59 and υ = 0.59). In this case, τmax and ςmax reduced by 6.2 and 4.1%, respectively, while ηmax and ξave increased by 6.8 and 1.0%, respectively.

Study on Billet Temperature Prediction and Furnace Temperature Optimal Setting of Regenerative Reheating Furnace

RESEARCH AND DEVELOPMENT ON INTEGRATED COMPUTER CONTROL SYSTEM FOR REHEATING FURNACES

Analysis of billet temperature non-uniformity in a regenerative reheating furnace: Considering periodic combustion switching and misalignment contact of walking beams

Numerical simulation and optimization of steel tube billet heating process in rotary hearth furnace using CFD

Measurements of Quality Variables for an Industrial Rolling Mill Reheating Furnace (II)

A Grey Model and Prediction of the Vacuum Distilled Furnace for Separating Sn-Pb Alloy

Study on Prediction and Optimization of Furnace Temperature Curve Based on Temperature Change Model

Study on Temperature Model and Self-Adaption for Finishing Stands of Hot Strip Mill

Temperature Prediction for Reheating Furnace by Gated Recurrent Unit Approach

Modeling approach and numerical analysis of a roller-hearth reheating furnace with radiant tubes and heating process optimization

Furnace heat prediction and control model and its application to large blast furnace

Temperature control of reheating furnace based on distributed model predictive control

Solving the heat transfer boundary condition of billet in reheating furnace by combining “black box” test with mathematic model

Process metallurgy and data-driven prediction and feedback of blast furnace heat indicators

Optimization and simulation of furnace temperature curve based on heat

Research on Temperature Change of Reflow Furnace Based On Mathematical Modeling

Numerical simulation and analysis of entropy generation and exergy equilibrium of the thermal process in a regenerative billet reheating furnace

A New Method to Optimize the Control of Reheating Furnaces

Real-Time Heat Transfer Model Based on Variable Non-Uniform Grid for Dynamic Control of Continuous Casting Billets

Applying of Real-time Heat Transfer and Solidification Model on the Dynamic Control System of Billet Continuous Casting

The study of heat-mass transfer characteristics and multi-objective optimization on electric arc furnace