Abstract:Ultrahigh‐speed casting is the most remarkable feature of billet high‐efficiency continuous casting. The transient fluid flow, heat transfer, and solidification behavior under different casting speeds, submerged entry nozzle (SEN) parameters, and mold electromagnetic stirring (M‐EMS) are investigated using a 3D transient mathematical model. The results show that a typical roll flow pattern is generated for all casting speeds, while a third small recirculation zone developed near the solidified shell at the casting speed of 6.0 m min−1. When the casting speed increases, the impact depth of the molten steel increases from 0.748 to 0.844 m, the velocity and level fluctuation at the steel/slag interface increases, the high‐temperature zone moves downward, and the shell thickness is reduced from 16.2 to 11.1 mm. As the SEN inner diameter and immersion depth increases, the impact depth increases, the velocity and level fluctuation at the steel/slag interface decreases, and the shell thickness at the mold exit is ≈11.0 mm. When the SEN immersion depth and inner diameter are 120 and 40 mm, respectively, the flow and temperature fields in the mold are the most appropriate. In addition, the M‐EMS have a great effect on the fluid flow and heat transfer behavior. A coupled 3D numerical model is established to study the fluid flow, heat transfer, and solidification in a billet continuous casting mold under different casting speeds, submerged entry nozzle (SEN) inner diameters, SEN immersion depths, and mold electromagnetic stirring (M‐EMS). The velocity field, temperature field, steel/slag level fluctuation, and the growth of solidified shell are analyzed comparatively.

Applying of Real-time Heat Transfer and Solidification Model on the Dynamic Control System of Billet Continuous Casting

Simulation and application of dynamic heat transfer model for improvement of continuous casting process

Real-Time Heat Transfer Model Based on Variable Non-Uniform Grid for Dynamic Control of Continuous Casting Billets

Continuous Casting Mould for Square Steel Billet Optimised by Solidification Shrinkage Simulation

A Three Dimensional Real-time Heat Transfer Model for Continuous Casting Blooms

3D Transient Heat Transfer Simulation and Optimization for Initial Stage of Steel Continuous Casting Process

Real‐Time Heat Transfer Model Based on Distributed Thermophysical Property Calculation for the Continuous Casting Process

Mathematical Heat Transfer Model Research for the Improvement of Continuous Casting Slab Temperature

Online Dynamic Control of Secondary Cooling for the Continuous Casting Process

Temperature Distribution and Dynamic Control of Secondary Cooling in Slab Continuous Casting

Analysis of Thermo-fluidic and Phase Change Behaviour of Liquid Steel in a Continuous Billet Caster Mould: Effect of Casting Speed

A Faster Than Real-Time Heat Transfer Model for Continuous Steel Casting

Real-time simulation of heat transfer in continuous casting

Numerical Simulation of the Fluid Flow, Heat Transfer, and Solidification in Ultrahigh Speed Continuous Casting Billet Mold

Investigation of Solidification, Heat Transfer and Fluid Flow in Continuous Casting of Steel Using an Advanced Modeling Approach

Heat-transfer and solidification model of continuous slab casting: CON1D

Numerical Simulation of Fluid Flow and Solidification in Continuous Slab Casting Mould Based on Inverse Heat Transfer Calculation

Mathematical modelling of fluid flow, heat transfer and solidification in a strip continuous casting process

Heat Transfer Simulation for Covers in Continuous Casting Process of Steel and Its Application

Numerical Simulation of Solidification and Heat Transfer in Continuously Cast Bloom

连铸板坯动态二冷控制系统开发与应用 Development and Application of Dynamic Secondary Cooling Control System on Continuous Casting Slab