Abstract:Ultrahigh‐speed casting is the most remarkable feature of billet high‐efficiency continuous casting. The transient fluid flow, heat transfer, and solidification behavior under different casting speeds, submerged entry nozzle (SEN) parameters, and mold electromagnetic stirring (M‐EMS) are investigated using a 3D transient mathematical model. The results show that a typical roll flow pattern is generated for all casting speeds, while a third small recirculation zone developed near the solidified shell at the casting speed of 6.0 m min−1. When the casting speed increases, the impact depth of the molten steel increases from 0.748 to 0.844 m, the velocity and level fluctuation at the steel/slag interface increases, the high‐temperature zone moves downward, and the shell thickness is reduced from 16.2 to 11.1 mm. As the SEN inner diameter and immersion depth increases, the impact depth increases, the velocity and level fluctuation at the steel/slag interface decreases, and the shell thickness at the mold exit is ≈11.0 mm. When the SEN immersion depth and inner diameter are 120 and 40 mm, respectively, the flow and temperature fields in the mold are the most appropriate. In addition, the M‐EMS have a great effect on the fluid flow and heat transfer behavior. A coupled 3D numerical model is established to study the fluid flow, heat transfer, and solidification in a billet continuous casting mold under different casting speeds, submerged entry nozzle (SEN) inner diameters, SEN immersion depths, and mold electromagnetic stirring (M‐EMS). The velocity field, temperature field, steel/slag level fluctuation, and the growth of solidified shell are analyzed comparatively.

Numerical Simulation of Solidification and Heat Transfer in Continuously Cast Bloom

Numerical Simulation and Experiments Research on Secondary Cooling Process of Thick Slab Continuous Casting

A Three Dimensional Real-time Heat Transfer Model for Continuous Casting Blooms

Numerical Simulation of Fluid Flow and Solidification in Continuous Slab Casting Mould Based on Inverse Heat Transfer Calculation

Numerical Simulation of Electromagnetic Stirring Field and Molten Steel Flow Field in Mold of Bloom Continuous Casting

Heat Transfer Simulation for Covers in Continuous Casting Process of Steel and Its Application

Numerical simulation analysis of thermal stress fields during solidification of steel casting

Investigation of Solidification, Heat Transfer and Fluid Flow in Continuous Casting of Steel Using an Advanced Modeling Approach

Continuous Casting Mould for Square Steel Billet Optimised by Solidification Shrinkage Simulation

Finite Point Method for the Simulation of Solidification and Heat Transfer in Continuous Casting Mold

Simulation and application of dynamic heat transfer model for improvement of continuous casting process

3D Transient Heat Transfer Simulation and Optimization for Initial Stage of Steel Continuous Casting Process

Numerical Simulation of the Thermo-Mechanical Process for Beam Blank Continuous Casting

Numerical simulation of continuous casting process of different steel grades considering solidification and mixing of different steel grades

Finite element numerical simulation on Thermo Mechanical couple in bloom mold

Applying of Real-time Heat Transfer and Solidification Model on the Dynamic Control System of Billet Continuous Casting

Mathematical Model of Fluid Flow and Solidification in Mold Region of Continuous Slab Casting

Numerical Simulation of the Fluid Flow, Heat Transfer, and Solidification in Ultrahigh Speed Continuous Casting Billet Mold

Three-dimensional Simulation of Solidification Process in Large Steel Ingot

A coupled model on fluid flow, heat transfer and solidification in continuous casting mold

Application of Process Simulation Software on Secondary Cooling Optimization for Continuous Caster