Abstract:A coupled thermo-metallo-mechanical model is proposed to analyse the temperature, stress and microstructure fields in multi-pass welding of P92 pipes. An axisymmetric model is adopted to increase the efficiency of the simulation. To preserve the temperature field from a three-dimensional (3D) analysis, a procedure is proposed to convert the 3D result into a two-dimensional (2D) form, which is compared to temperature fields created by other 2D heat transfer analyses. A metallurgical algorithm, which does not need the calibration with metallurgical experiments, is implemented in the finite element (FE) analysis to predict spatial distributions of product phases during multi-pass welding. Comparison between the predictions and the metallurgical graphs is made to verify the effectiveness of the metallurgical analysis after twenty thermal cycles. Hardness test is also employed to characterize the microstructure and to validate the metallurgical predictions. Five temperature fields, one created from the newly proposed approach and four from existent ones, are used as external loads to conduct the mechanical analysis. The volumetric change due to the phase transformation is considered as an extra volumetric strain, which is implemented by user subroutine. The stress distributions predicted using the five temperature fields are plotted together with the 3D stress result to examine the effectiveness of the developed procedure. The stress at the external surface of the pipe is measured by the X-ray diffraction technique, and is further compared to the stress predictions. The advantage of the model is demonstrated by comparing the computational time consumed in the mechanical analysis.

Boundary Parameters During Glass Lubricated Hot Extrusion of Steel Pipes

Experimental Study on Heat Transfer Boundary Conditions for Steel Hot Extrusion Process

Lubrication Behavior of the Glass Lubricated Hot Extrusion Process

Analysis of breakthrough extrusion pressure for large scale steel pipe

Glass Lubrication Technology in Steel Hot Extrusion

A Friction Evaluation Method Based on Barrel Compression Test

Investigation of Interfacial Debonding Between Steel Wire and Adhesive Resin

Investigation on heat transfer coefficient of glass lubricated interface between P92 heat-resistant steel and H13 steel

Modeling the Interfacial De-Bonding Behavior Between Steel Wire and Adhesive

Effect of the Friction on the External High Pressure Forming of Metal Stator Screw Lining

Prediction and Analysis of Breakthrough Extruding Force Based on a Modified FE-model in Large-Scale Extrusion Process

Research on the shape of glass pad for hot extrusion of stainless steel tube

Thermal, metallurgical and mechanical analysis of circumferentially multi-pass welded P92 steel pipes

THEORETICAL COMPUTATION ON THE EXTRUSION OF LARGE SCALE STEEL PIPE BASED ON UPPER BOUND METHOD

FEM Simulation of Glass Lubrication During Section Extrusion of Titanium Alloy

Prediction of Residual Stress Distributions in Welded Sections of P92 Pipes with Small Diameter and Thick Wall Based on 3D Finite Element Simulation

Numerical simulation of hot hydrostatic extrusion of W-40wt.% Cu

A Finite Element Model for Hydrodynamic Lubrication of Cold Extrusion with Frictional Boundary Condition

Correlation between flow characteristics and interfacial friction behaviour of a Zr-based metallic glass during micro-extrusion

The Fem Analysis Of Rolling-Sliding Contact Under Boundary Lubrication'S

Hot Deformation Behavior and Recrystallization Analysis of Pipe 20CrNiMo Steel