Abstract:P91 steel is considered an appropriate material for high-quality pipes used in nuclear plant. In the extrusion process on 680-million-newton-tonnage forging and extruding machine to manufacture long seamless P91 pipes with large diameter and wall-thickness, the extruding force peak during the process will exceed 500 million newtons. For security consideration, prediction of extruding force, especially breakthrough force, must be accurate to avoid accidents like jamming. A modified finite element model has been developed to predict the extruding force in large-scale glass lubricant hot extrusion of P91 pipes and declare the relationship between the friction ratio and container temperature. On the basis of the practical extrusion results obtained on 360-million-newton-tonnage extruding machine and characteristics of large-scale extrusion, the billet cooling period and new viscous friction model on billet–container interface are added or established as the modification on the most significant sensitive factors. Using the modified model, the average temperature error after cooling is 3.23 °C and the maximum decrease of simulation results of breakthrough extruding force on 360-MN machine is 17 MN. The predicted results correspond to the decreasing tendency of the measured ones. The deviation between the simulated breakthrough extruding force and measured one on 680-MN machine is only 0.3%, which validates the accuracy of force-predicting model. This study may offer the basis for precise prediction for complete large-scale extrusion process and provide guidance to reduce the breakthrough force in the extrusion process.

Analysis of breakthrough extrusion pressure for large scale steel pipe

Prediction and Analysis of Breakthrough Extruding Force Based on a Modified FE-model in Large-Scale Extrusion Process

Boundary Parameters During Glass Lubricated Hot Extrusion of Steel Pipes

Design of a Large Diameter Steel Reinforced Plastic Pipe

THEORETICAL COMPUTATION ON THE EXTRUSION OF LARGE SCALE STEEL PIPE BASED ON UPPER BOUND METHOD

Experimental Study on Heat Transfer Boundary Conditions for Steel Hot Extrusion Process

Lubrication Behavior of the Glass Lubricated Hot Extrusion Process

Glass Lubrication Technology in Steel Hot Extrusion

Burst Pressure of Pipelines with Plastic Anisotropy under Combined Internal and External Pressures

Research on the shape of glass pad for hot extrusion of stainless steel tube

Contact Pressure Between Roller and Pipe Blank of the Longitudinally Welded Pipe Open Pass

A Novel Design of Extrusion Container for Large Steel Tube Extrusion Process

Deformation behavior and load analysis of TP304 stainless steel billet during hot expansion process

Cracking Analysis on X80 Steel Oil Pipe during JCOE Forming

Analysis of Steel Strip Flexible Pipes under Internal Pressure and Bending

Hot Deformation Behavior and Recrystallization Analysis of Pipe 20CrNiMo Steel

Experimental Research and Manufacturing Technology of Heavy Gauge WPHY-80 Pipe Fitting Plate with Uniform Microstructure

Analysis On The Mechanical Properties Of The Plastic Pipe Reinforced By Cross Helically Winding Steel Wires(Psp) Under Internal Pressure

Extrusion forming simulation of microchannel flat tube and welding quality prediction

Fracture failure analysis and research on super-large-diameter roll

Research on Constant Velocity Extruding Process Control for 36,000-Ton Vertical Extrusion Press