Abstract:In order to better reflect the actual heat transfer process, the heat transfer process of the gas jet matrix impact cooling strip steel was studied by the experimental method, and investigated the effects of jet Reynolds number Re, dimensionless nozzle spacing Χn/D (the ratio of the orifice spacing to the orifice diameter), dimensionless jet height H/D (the ratio of strip to orifice distance to orifice diameter) on forced convection heat transfer coefficient. Finally, the empirical formula of Nu is fitted basing on the experimental results. In order to study the strip jet cooling more comprehensively, combined with the experimental results, a one-dimensional unsteady heat transfer model was established for the cyclic spray cooling heat transfer of strip steel protective atmosphere, calculated the temperature field of strip steel by finite difference numerical calculation method, The results show that there is a maximum operating speed for strip steel of different thicknesses on the premise of meeting the performance requirements and safety; The larger Η/D or Χn/D, the higher outlet temperature of strip steel, and the increase rate of strip steel outlet temperature will decrease with the increase of Η/D and Χn/D; As the temperature of the cooling medium increases by 10 °C, strip steel outlet temperature increases by about 5 °C. When the volume percentage of hydrogen in the cooling medium and the flow rate of the cooling medium increase, the temperature of strip steel outlet will decrease, however, the rate of decrease will gradually decrease. The industrial application results showed the calculated value of the outlet temperature of strip steel agrees well with the measured value, and the error is about 2.78%, which means that the model meets the application requirements.

The effect of laminar cooling heat transfer coefficient on the temperature field of steel plate

Experiments and numerical simulation of dynamic cool-down process of stainless steel plate in liquid nitrogen bath

Thermo-Mechanical Coupling Computation and Warping Analysis During Controlled-Cooling of X65 Heavy Pipeline-Plate

Analyzing metal material cooling intensity: A method for obtaining heat transfer coefficients

Latent heat and TRIP effect of X65 heavy pipeline plate during controlled cooling

A Study on the Heat Transfer Characteristics of Steel Plate in the Matrix Laminar Cooling Process

The Study of Controlled Cooling Technology and Warping of X65 Heavy Pipeline Plate

Experimental and numerical study of the effect of conjugate heat transfer on film cooling

Heat Transfer from a Hot Steel Plate Impinged by Air-atomized Water Jet and Impinging Water Jet

The Efficient Way to Design Cooling Sections for Heat Treatment of Long Steel Products

Numerical simulation of steel-copper-steel composite cooling staves: Heat transfer characteristics and structural optimization

Conjugate Heat Transfer Investigation of Trenched Film Cooling Characteristics

Numerical simulation and experimental study of strip steel jet cooling

Study on the effect law of jet angle on the cooling of hot-rolled L-beam

Heat transfer characteristics and cooling capacity of online quenching equipment for plate

Numerical Investigation on Mechanism of Heat Transfer Augmentation in Lamilloy

Experimental and numerical investigation of the cooling characteristics in a laminate porous plate

Influence of jet angle on heat transfer during cooling of hot rolled seamless steel tubes

The Effect of Cooling Conditions on Convective Heat Transfer and Flow in a Steam-Cooled Ribbed Duct

Computational Thermodynamics/kinetics Aided Design for the Microstructure of Pearlitic Steels During Cooling Process

Experimental Investigation on Determinant of Steel Specimen Transformation Temperature under Air Cooling Conditions