Abstract:When unbalanced insulation is applied to double circuit transmission lines on the same tower,the minimum degree of insulation unbalancedness,by which the lower insulation level is configured at one of the double circuit transmission lines to ensure that the phase-to-phase flashover always occurs at the side with the lower insulation level,is analyzed by electromagnetic transient program(EMTP),and a corresponding insulation configuration scheme is provided.When the balanced insulation or the insulation with low unbalancedness is adopted to double circuit transmission lines on the same tower,the inter-circuit flashover caused by lightning stroke usually happens,namely there is a single-phase flashover in each circuit,however along with the extension of the difference in insulation levels for the two circuits,the inter-circuit flashover gradually turns to phase-to-phase flashover happening at the circuit with the lower insulation level.Based on this principle and by means of ensuring enough difference between insulation levels for the two circuits,it can make sure that when double circuit transmission lines on the same tower is lightning-stricken the phase-to-phase flashover only happens at the circuit with the lower insulation level,therefore the serious fault of simultaneous trip-out of two circuits can be avoided at the cost of trip-out of one circuit.Calculation results show that when the degree of insulation unbalancedness for double 220 kV or 110 kV circuit transmission lines on the same tower reaches to 30%,or in other word,the difference in insulator pieces of a string between two 220 kV circuits or two 110 kV circuits is 4 or 3 pieces respectively,the unbalanced insulation can restrict the circuit,where phase-to-phase flashover happens.Besides,the effect of such a measure is reliable and suitable for double circuit transmission lines on the same tower with various conductor arrangements of phase sequence to avoid simultaneous trip-out of both circuits for double circuit transmission lines on the same tower due to lightning stroke.

Sensitivity of lightning shielding failure of double-circuit transmission line on tower geometric structures

Statistical Method of Lightning Current Amplitude Distribution Along Transmission Line Corridor

Dependence of overhead line tower geometric constructions to the lightning shielding failure

Research of the Lightning Protection Performance for 220 Kv Double-Circuit Transmission Line

Simulated Calculation and Analysis of Lightning Performance of UHV A.C. Transmission Line

Lightning Performance of Quadruple-circuit Transmission Line with Dual Voltage 500/220 Kv on the Same Tower

Application of EGM in Lightning Protection Design of Transmission Line with Ultra-high Tower and Great Span

Effects of Reducing Shielding Angle on Improving Lightning Performance of Transmission Lines

Improving the Lightning Protection Effect of Multi-Circuit Tower by Installing Coupling Ground Wire

Lightning Performance of the Dinghai- Ningbo East Extra-large Span Transmission Line

Analysis of Protection Effects of Using Side Needle on Ground Wires Against Shielding Failure in Transmission Line

Approaching to Rotated Lightning Strike on Transmission Line

Design of Multi-Surge Impedance Model for Ultra-High Transmission Tower and Analysis Onits Transient Characteristic Caused by Lightning Stroke

Application of Unbalanced Insulation in 220 Kv and 110 Kv Double-Circuit Transmission Lines on the Same Tower

Adopting Differential Lightning Protection Measures to Reduce Simultaneous Trip Probability of 220 kV Double-Circuit Transmission Line on the Same Tower

Comparative Research on Z-Type Tower and Traditional T-Type Tower for UHVDC Transmission Lines Located at Mountain Areas

Study on Lightning Performance for ±500kV DC Double Circuit Transmission Lines

Impact of coupling ground wire on lightning protection effect of multi-circuit tower

Applying longitudinal differential protection against simultaneous lightning outage for double-circuit transmission lines on same tower

Analysis on Effect of Protecting Transmission Lines from Shielding Failure by Sideward Rods Installed Onto Crossarm of Towers

Influence of Mounting Location and Number of Coupling Ground Wires on Characteristic of Lightning Protection for 500/220kv Quadruple-circuit Transmission Line on Same Tower