Abstract:In this paper, a millimeter-wave (mmWave) dual-wideband full-metal filtering power divider (FPD) with low insertion loss is proposed. The FPD is designed using groove gap waveguide (GGW) and spoof surface plasmon polariton (SSPP) integrated with novel modified split ring resonators (MSRRs). A single-wideband T-junction FPD is first designed by embedding SSPP into the groove of GGW. The lower and upper cut-off frequencies can be conveniently adjusted by changing the width of GGW and the height of SSPP, respectively. Besides, a tuning pillar is utilized to improve impedance matching. Furthermore, two coupled MSRRs are embedded into the single-wideband FPD to introduce an extra stopband, whose center frequency and bandwidth can be tuned almost independently by the location and size of MSRRs. Thus, a dual-wideband FPD is realized. Finally, a prototype is fabricated and measured to validate the design concept. Comparison between the measured and simulated results shows a good agreement. The frequency ranges of the lower and upper bands are 20.92 - 24.92 GHz and 27.48 - 32.12 GHz with average insertion losses of 0.45 dB and 0.70 dB, respectively. Within both bands, the magnitude and phase differences between the two output ports are lower than 0.3 dB and 6°, respectively.

Millimeter Wave Power Divider Based on Frequency Selective Surface

Design of a Power Divider for Millimeter Wavelength Applications

W-band Power Divider Based on H-plane Slot Waveguide Bridge

Dual-Band Millimeter-Wave Filtering Power Divider Using Groove Gap Waveguide and Spoof Surface Plasmon Polariton

Millimeter Wave Compact Power Divider Based on Micro-coaxial Lines

Millimeter Wave Dual Wideband Filtering Power Divider Using Groove Gap Waveguide and Spoof Surface Plasmon Polariton

A design of single‐ended to differential‐ended power divider for X band application

A Novel Power Divider Integrated with Siw and Dgs Technology

8-way substrate integrated waveguide power divider

Dual-band Wilkinson Power Divider Based on SS-CML

Dual-band power dividers using substrate integrated circular cavity

A Four-Way All-Metal-Waveguide Power Divider for Millimeter-Wave/Thz Array Application

X-Band Power Divider Design and Its Network for Active Electronically Scanned Array Vertical Integration

An Improved Compact Power Divider/combiner Designed Using HMSIW Structure

Compact Power Divider with Improved Isolation and Bandpass Response

Ultra‐wideband Power Divider Employing Coupled Line and Short‐ended Stub

A New Dual-Band Wilkinson Power Divider

Design of Low-Profile Millimeter-Wave Substrate Integrated Waveguide Power Divider/Combiner

Double‐layer Microstrip Ultra‐wideband Filtering Power Divider with High Selectivity and Large Isolation

Novel Subterahertz High Isolation Stacked-SIW Power Divider

A mmWave Waveguide Filtering Power Divider Based on SSPP-RWG Structure