Abstract:Low-voltage scanning electron microscopy (LV-SEM) with landing energies below 5 keV has been widely used due to its advantages in mitigating the damage and charging effects to a specimen and enhancing surface information due to small interaction volume of electrons inside a specimen. Additionally, for elemental analysis of the surfaces of bulk specimens with Auger electron spectroscopy (AES) or electron energy loss spectroscopy (EELS), ultra-high-vacuum (UHV) environment is essential to maintain clean surfaces without the absorption of gas molecules during the electron beam irradiation for the acquisition of spectral data. In this study, we propose the optimal design and condition of a conical Electrostatic Objective Lens (EOL) for a UHV LV-SEM to achieve the high spatial resolution and secondary electron (SE) detection efficiency. The EOL is composed of only the three electrodes (retarding, focusing and booster electrodes) and the insulators, which is suitable for maintaining a UHV environment with less out-gassing. The cone angle of the EOL is determined as 60° to integrate a spectrometer in the UHV LV-SEM and in a large size and a higher tilt angle of the sample. Through the optimization with the simulations, the EOL achieves the minimized spherical and chromatic aberration coefficients of 0.05 and 0.03 mm at the sample side, respectively, at the landing energy of 50 eV and the shortest working distance (WD) of 1 mm for high-resolution imaging. In addition, the probe diameter of the optimized EOL is 2.3 nm at 1 keV and 5.7 nm at 50 eV with a WD of 1 mm and a probe current of 10 pA, which are comparable to previously studied compound objective lenses with magnetic and electrostatic lenses. Using a longer WD of 4 mm for analysis, the probe diameter was 5.4 nm at 1 keV and the SE detection efficiency was 83.3 % owing to the separated scintillator detector structure from the booster electrode. These results imply that the optimized EOL has the potential to be applied to a high-performance UHV LV-SEM for the surface imaging and analysis with a simple system configuration.

A compact low energy electron microscope for surface analysis

A compact CCD-monitored atomic force microscope with optical vision and improved performances.

Development of a Low-Energy Electron Point Source Microscope and Some Initial Experimental Results on It

A novel electrochemical atomic force microscope and its applications

On the Resolution of the Low-Energy Electron Reflection Microscope

Angle-resolved photoelectron spectroscopy in a low energy electron microscope

High energy electron diffraction instrument with tunable camera length

Probing Transient Localized Electromagnetic Fields Using Low-Energy Point-Projection Electron Microscopy

High-Resolution Low-Voltage Electron-Optical System for Very Large Specimens

Low-voltage coherent electron imaging based on a single-atom electron

Design and optimization of a conical electrostatic objective lens of a low-voltage scanning electron microscope for surface imaging and analysis in ultra-high-vacuum environment

A compact fluorescence and polarization near-field scanning optical microscope

A Compact High-Energy Electron Radiography System Based on Active Plasma Lenses

A new aberration-corrected, energy-filtered LEEM/PEEM instrument. I. Principles and design

A Combined Objective Lens-Energy Analyser for Electron Beam Testing of IC

Development of Coherent Electron Beam Instrument

Toward High-Resolution Low-Voltage SEM

Miniature Electrostatic Electron Energy Analyzers and S-shaped Deflector

A kiloelectron-volt ultrafast electron micro-diffraction apparatus using low emittance semiconductor photocathodes

Single-atom electron microscopy for energy-related nanomaterials

Sub-0.5 eV EFTEM Mapping using the Zeiss SESAM