Abstract:In this paper, we present a cantilever-probe system excited by a piezoelectric actuator, and use it to measure the dynamic mechanical properties of a micro- and nanoscale fiber. Coupling the fiber to the free end of the cantilever probe, we found the dynamic stiffness and damping coefficient of the fiber from the resonance frequency and the quality factor of the fiber-cantilever-probe system. The properties of Bacillus subtilis fibers measured using our proposed system agreed with tensile measurements, validating our method. Our measurements show that the piezoelectric actuator coupled to cantilever probe can be made equivalent to a clamped cantilever with an effective length, and calculated results show that the errors of measured natural frequency of the system can be ignored if the coupled fiber has an inclination angle of alignment of less than 10 degrees. A sensitivity analysis indicates that the first or second resonant mode is the sensitive mode to test the sample's dynamic stiffness, while the damping property has different sensitivities for the first four modes. Our theoretical analysis demonstrates that the double-cantilever probe is also an effective sensitive structure that can be used to perform dynamic loading and characterize dynamic response. Our method has the advantage of using amplitude-frequency curves to obtain the dynamic mechanical properties without directly measuring displacements and forces as in tensile tests, and it also avoids the effects of the complex surface structure and deformation presenting in contact resonance method. Our method is effective for measuring the dynamic mechanical properties of fiber-like one-dimensional (1D) materials.

Flexural Resonance Vibrations of Piezoelectric Ceramic Tubes in Besocke-Style Scanners

Vibration Characteristics of Besocke-Style Scanning Systems

Effects of Stick–slip Motions on Besocke-style Scanners in Scanning Probe Microscopes

Effects of Ramp Vibrational States on Flexural Intrinsic Vibrations in Besocke-Style Scanners

Flexural vibration analyses of piezoelectric ceramic tubes with mass loads in ultrasonic actuators.

Analysis of Longitudinal and Torsional Resonance Vibrations of a Piezoelectrically Excited Bar by Introducing Piezoelectric Loss Coefficients

Simplified Formulae to Investigate Flexural Vibration Characteristics of Piezoelectric Tubes in Ultrasonic Micro-Actuators

Study of piezo-induced surface vibration in solids using atomic force probe

Bending and free vibration of piezomagnetic Timoshenko beams with the flexomagnetic and surface effects

Comparison of Flexoelectric and Piezoelectric Dynamic Signal Responses on Flexible Rings

Experimental research on scanning performance of four-segmented PZT tube

Research on Effective Electric-Mechanical Coupling Coefficient of Sandwich Type Piezoelectric Ultrasonic Transducer Using Bending Vibration Mode

Modeling and Analysis of Reverse-Fixed Piezoelectric Tube Fiber Scanner for Two-Photon Endomicroscopy

Investigation of the electric response of the piezoelectric curved beam considering the direct piezoelectric and flexoelectric effects

Characterization of Piezoelectric Materials Using Ultrasonic and Resonant Techniques

Dynamic Characterization of Small Fibers Based on the Flexural Vibrations of A Piezoelectric Cantilever Probe

3.8×3.8 mm2 compact piezoelectric resonant MEMS scanner using fork-shaped and ring-shaped actuators

An Original 2-D Analytical Model for Investigating Coupled Vibrations of Finite Piezoelectric Resonators

Laser Doppler vibration analysis of miniaturized piezoelectric scanning structure

Excitation and detection of evanescent acoustic waves in piezoelectric plates: Theoretical and 2D FEM modeling

Improvement and Application of Scanning Near Field Optical Microscope Based on A Piezoelectric Bimorph Shear Force Beam