Abstract:The sandwiched type torsional piezoelectric actuators have widely been employed in the fields of ultrasonic cutting, ultrasonic drilling, ultrasonic welding, ultrasonic wire drawing, ultrasonic spraying, and microdroplet generation, due to their unique vibration form. However, the circular piezoelectric ceramic plate polarized in the circumferential direction holds a complicated manufacturing process, a long processing period, and a high price. It can only be used for the excitation of the torsional vibration of circular rods, and cannot be used for square cross-section beams, severely restricting its applications. In order to solve the above problems, a novel excitation method is proposed for generating torsional vibration in the square cross-section beam in this study, which uses the d 15 vibration mode of rectangular piezoelectric ceramic plates to produce the torsional vibration, and a novel transfer matrix model of square torsional piezoelectric element is created. Then a case study is conducted in this paper to confirm the proposed excitation method and the developed model, in which two novel sandwiched type torsional piezoelectric actuators are designed. Moreover, electromechanical coupling models of these two torsional piezoelectric actuators are developed using the transfer matrix method, in order to reveal their dynamics behaviors. Finally, the finite element method and the experimental investigations are adopted to analyze and test the frequency response characteristics and vibration shapes of the proposed piezoelectric actuators. Both simulation analysis and experimental tests verify the effectiveness of the proposed excitation method and the correctness of the developed electromechanical coupling dynamic models. The proposed excitation method provides a new idea for the design of sandwiched type torsional piezoelectric actuators, and the developed theoretical model lays a theoretical foundation for the further research of torsional piezoelectric actuators.

Vibration Characteristics of Besocke-Style Scanning Systems

Flexural Resonance Vibrations of Piezoelectric Ceramic Tubes in Besocke-Style Scanners

Effects of Stick–slip Motions on Besocke-style Scanners in Scanning Probe Microscopes

Effects of Ramp Vibrational States on Flexural Intrinsic Vibrations in Besocke-Style Scanners

Vibration Compensating Beam Scanning Interferometer for Surface Measurement

Locally Resonant Band Gaps in Flexural Vibrations of A Timoshenko Beam with Periodically Attached Multioscillators

Analysis of Longitudinal and Torsional Resonance Vibrations of a Piezoelectrically Excited Bar by Introducing Piezoelectric Loss Coefficients

Stochastic Micro-Vibration Response of A Spherically Symmetric Piezoelectric Shell Structure As Sensor

The Modeling of a Piezoelectric Transformer Using a Transverse Vibration

Two-dimensional electromechanical-coupling modeling for out-of-plane bending vibration of cross-type beams

Research on Effective Electric-Mechanical Coupling Coefficient of Sandwich Type Piezoelectric Ultrasonic Transducer Using Bending Vibration Mode

Model-Based Analysis and Regulating Approach of Air-Coupled Transducers with Spurious Resonance.

Design and Analysis of a Piezo-Actuated Flexure-Based Scanning System in ECDLs

Flexural vibration analyses of piezoelectric ceramic tubes with mass loads in ultrasonic actuators.

Laser Doppler vibration analysis of miniaturized piezoelectric scanning structure

Modeling and Simulation Analysis for a L-shaped Wideband Piezoelectric Cantilever Beam

An Original 2-D Analytical Model for Investigating Coupled Vibrations of Finite Piezoelectric Resonators

Experimental research on scanning performance of four-segmented PZT tube

Discovery and discussion of low frequency vibration of four-segment piezo-tube

Concept and Electromechanical-Coupling Modeling of a Torsional Vibration Excitation Method

Torsional Vibrations of A Cantilever with Lateral Friction in A Resonance Friction Microscope