Abstract:The paper presents a technique to obtain an electrically-tunable matching between the series and parallel resonant frequencies of a piezoelectric MEMS acoustic transducer to increase the effectiveness of acoustic emission/detection in voltage-mode driving and sensing. The piezoelectric MEMS transducer has been fabricated using the PiezoMUMPs technology, and it operates in a plate flexural mode exploiting a 6 mm × 6 mm doped silicon diaphragm with an aluminum nitride (AlN) piezoelectric layer deposited on top. The piezoelectric layer can be actuated by means of electrodes placed at the edges of the diaphragm above the AlN film. By applying an adjustable bias voltage Vb between two properly-connected electrodes and the doped silicon, the d31 mode in the AlN film has been exploited to electrically induce a planar static compressive or tensile stress in the diaphragm, depending on the sign of Vb, thus shifting its resonant frequency. The working principle has been first validated through an eigenfrequency analysis with an electrically induced prestress by means of 3D finite element modelling in COMSOL Multiphysics®. The first flexural mode of the unstressed diaphragm results at around 5.1 kHz. Then, the piezoelectric MEMS transducer has been experimentally tested in both receiver and transmitter modes. Experimental results have shown that the resonance can be electrically tuned in the range Vb = ±8 V with estimated tuning sensitivities of 8.7 ± 0.5 Hz/V and 7.8 ± 0.9 Hz/V in transmitter and receiver modes, respectively. A matching of the series and parallel resonant frequencies has been experimentally demonstrated in voltage-mode driving and sensing by applying Vb = 0 in transmission and Vb = −1.9 V in receiving, respectively, thereby obtaining the optimal acoustic emission and detection effectiveness at the same operating frequency.

3.8×3.8 mm2 compact piezoelectric resonant MEMS scanner using fork-shaped and ring-shaped actuators

3.8×3.8 mm2 Tiny Piezoelectric Resonant MEMS Scanner Using Fork-Shaped and Ring-Shaped Actuators

A large-scan-angle piezoelectric MEMS optical scanner actuated by a Nb-doped PZT thin film

Design of a Bi-Axial Piezoelectric MEMS Scanner with Tri-Gimbal Structure for Scanning Pattern Enhancement

Wide Angle and High Frequency Resonant Piezoelectric MEMS Mirror for Laser Beam Scanning Application

A Piezoelectrically Actuated Scaning Micromirror Integrated with Angle Sensors

On-chip frequency tuning of fast resonant MEMS scanner

A Two-Dimensional Micro Scanner Integrated With A Piezoelectric Actuator And Piezoresistors

A Review of Piezoelectric Design in MEMS Scanner

Design And Optimization Of Micro Scanner Driven By Folded Piezoelectric Unimorph Actuators Using Pzt Films

Highly Linear and Wide Non-Resonant Two-Degree-of-Freedom Piezoelectric Laser Scanner

On the Design of Piezoelectric actuator for 1D MEMS scanning mirror applications

A Resonant Piezoelectric MEMS Mirror with 180-Degree Optical Scan Angle Under Atmosphere Pressure

Aerosol jetted PZT actuated fiber MEMS scanner for potential microscopic imaging

Development of Piezoelectric Driving MEMS Scanning Mirror

Tip-tilt-piston Piezoelectric Micromirror with Folded PZT Unimorph Actuators

A Novel Piezoelectrically Actuated 2-Dof Compliant Micro/Nano-Positioning Stage with Multi-Level Amplification

On the design of piezoelectric MEMS scanning mirror for large reflection area and wide scan angle

Mirrorless MEMS imaging: a nonlinear vibrational approach utilizing aerosol-jetted PZT-actuated fiber MEMS scanner for microscale illumination

Piezoelectric MEMS Acoustic Transducer with Electrically-Tunable Resonant Frequency

Dual-Axis Piezoelectric Mems Micromirror with Adjustable Aspect Ratio of Lissajous Patterns Through Structure Design and Electrode Arrangement