Abstract:This study presents the design, implementation, and characterization of 1D resonant type micro-electro-mechanical-systems piezoelectric scanning mirrors with different actuator designs to investigate their influences on the figure of merits (FoM) for automotive LiDAR application. The MEMS scanning mirrors are driven by PZT thin film in this study owing to its outstanding piezoelectric properties. Three different beam-type piezoelectric actuators are designed, including the reference meander straight-beam actuator design, and the proposed meander curved-beam and straight-curved tapered beam actuator designs. Simulations show the scan angle enhancement for two proposed designs, yet the resonant scanning frequency of meander curved-beam design dropped to below the 2 kHz requirement. To evaluate the designs, scanning mirrors with two proposed actuators are fabricated and tested. Measurements show that the resonant frequencies for the two proposed MEMS scanning mirrors are 1735 Hz and 2578 Hz, respectively. Two proposed designs respectively have the maximum optical angles of 48.1° and 50.6° at the 20 Vpp driving voltage. Due to the much higher stress on the beam structure induced by the misalignment of PZT film, the actuator could not reach the predicted scanning angle of near 80°. In comparison of the two proposed designs, the straight-curved tapered beam actuator design could enhance the FoM for about 56%. In summary, the performances of piezoelectric MEMS scanning mirror can be improved by varying the designs of length and shape of actuator, and the distribution of PZT film on the suspended actuator is also a critical design concern.

Design of a Bi-Axial Piezoelectric MEMS Scanner with Tri-Gimbal Structure for Scanning Pattern Enhancement

Design of bi-axial piezoelectric MEMS micro mirror with gimbal actuator for dynamic decoupling

Dual-Axis Piezoelectric Mems Micromirror with Adjustable Aspect Ratio of Lissajous Patterns Through Structure Design and Electrode Arrangement

On the design of piezoelectric MEMS scanning mirror for large reflection area and wide scan angle

Wide Angle and High Frequency Resonant Piezoelectric MEMS Mirror for Laser Beam Scanning Application

A Resonant Piezoelectric MEMS Mirror with 180-Degree Optical Scan Angle Under Atmosphere Pressure

On the Design of Piezoelectric actuator for 1D MEMS scanning mirror applications

Novel Piezoelectric Actuation Mechanism for a Gimbal-Less Mirror in 2D Raster Scanning Applications

Symmetry breaking and mechanical filter make a pseudo-gimbal-less two-dimensional MEMS scanning mirror with multiple scanning modes

3.8×3.8 mm2 Tiny Piezoelectric Resonant MEMS Scanner Using Fork-Shaped and Ring-Shaped Actuators

Modeling and Optimization of a Novel ScAlN-Based MEMS Scanning Mirror with Large Static and Dynamic Two-Axis Tilting Angles

3.8×3.8 mm2 compact piezoelectric resonant MEMS scanner using fork-shaped and ring-shaped actuators

Design and investigation of dual-axis electrostatic driving MEMS scanning micromirror

Novel Bow-Shape Transmission Springs for Piezoelectric MEMS Mirror with 180-Degrees Optical Scanning Angle

AlScN Piezoelectric MEMS Mirrors with Large Field of View for LiDAR Application

Development of an Electrostatic Comb-Driven MEMS Scanning Mirror for Two-Dimensional Raster Scanning

Design of Butterfly Plate Piezoelectric Actuator with Dual Driving Electrodes for MEMS Micro-Mirror

A Poly-Si-Based Vertical Comb-Drive Two-Axis Gimbaled Scanner for Optical Applications

Mirrorless MEMS imaging: a nonlinear vibrational approach utilizing aerosol-jetted PZT-actuated fiber MEMS scanner for microscale illumination

Design And Optimization Of Micro Scanner Driven By Folded Piezoelectric Unimorph Actuators Using Pzt Films

Piezoresistor Design For Deflection Angles Decoupling Measurement Of Two-Dimensional Moems Scanning Mirror