Abstract:When trace elements in an ultra high-purity iron were deter-mined, an analytical blank on a chemical analysis interfered with the determination of them. Similarly, the existence of major component in a sample interfered with the determination of trace elements. Therefore, in order to determine trace elements, it was examined that how to remove or decrease an analytical blank and how to separate trace elements from major component of a sample. For example, when C and S in an ultra high-purity iron were determined by combustion/infrared absorption method, an accelerator for combustion of an analytical sample contained C and S as blank. The accelerator consisted of a mixture of tungsten and tin. By heating it in ambient atmosphere, carbon blank was removed to be zero and sulfur blank was decreased to lower level. Consequently, when detection limit was defined as a value corresponding to 3 times of the standard deviation of blank value, it of carbon was infinitesimal and it of sulfur was 0.2 mug g(-1). Infinitesimal detection limit of carbon resulted from zero of the blank value of carbon. For that reason, detection limit.. of carbon that was minimum scale for carbon on the analytical instrument, because the standard deviation of carbon was read as 0.01 mug g(-1) of carbon that was minimum scale for carbon on the analytical instrument, because the standard deviation of the blank value could not to be calculated. Independently, in order to determine trace Sn, Ag and Au in a high-purity iron, these elements were separated from major component (iron) by co-precipitation. Metallic Pd was used as co-precipitant. Metallic Pd had been rarely used as co-precipitant. The elements were determined by electrothermal atomic absorption spectrometry (ET-AAS). When these elements were detected by ET-AAS, the Pd was available as chemical modifier. By the separation. content 0.002-0.02 mug g(-1) of the elements was determined.

Enrichment of trace iron with activated carbon in Bi-based superconductor powder and determination by inductively coupled plasma atomic emission spectroscopy

Determination of trace nickel in Bi-based superconductor powder by inductively coupled plasma atomic emission spectroscopy after separation with anion exchange resin and extraction with methylbenzene

Correction of Spectral Interferences with Mutual Interference Coefficient Matrix for Determination of Impurities in Bi-Based Superconductor Powder by Inductively Coupled Plasma Emission Spectrometry

Determination of Bismuth Based Superconductor by ICP-AES

Study on the Method for Determination of Sulfate in Fe-catalyst by Inductively Coupled Plasma Atomic Emission Spectrometry

ICP-OES Determination of trace Ga,In,Bi,Sn and Pb preconcentrated by macroporous poly(vinylethylenediamine) chelating resin

Determination of Trace Amounts of Lead, Arsenic, Nickel and Cobalt in High-Purity Iron Oxide Pigment by Inductively Coupled Plasma Atomic Emission Spectrometry after Iron Matrix Removal with Extractant-Contained Resin.

Determination of As, Pb, Sn, Sb and Bi in High Temperature Iron and Nickel-Based Alloy by Graphite Furnace Atomic Absorption Spectrometry Combined with Liquid-Liquid Extraction

Synthesis, characterization and application of ethylenediamine-modified multiwalled carbon nanotubes for selective solid-phase extraction and preconcentration of metal ions.

Functionalized Halloysite Nanotubes with 2-Hydroxybenzoic Acid for Selective Solid-Phase Extraction of Trace Iron(Iii)

Investigation on Producing Super Iron Concentrate Powder with the Concent rate of Panluo Iron Mine

Direct Determination of Trace Elements in Micro Amounts of Biological Samples Using Electrothermal Vaporization Coupled to Icp-Aes

ICP-AES determination of trace elements after preconcentrated with p-dimethylaminobenzaldehyde-modified nanometer SiO2 from sample solution

Determination of Trace Amounts of Elements in High-Purity Iron Steels and Cr-Fe Alloy by Icp-Oes after Anion-Exchange Separation

Fast and selective magnetic solid phase extraction of trace Cd, Mn and Pb in environmental and biological samples and their determination by ICP-MS

Enrichment of trace scandium with microcrystalline naphthalene and subsequent ICP-AES determination

On-Line Separation and Preconcentration of Trace Metals in Biological Samples Using a Microcolumn Loaded with PAN-Modified Nanometer-Sized Titanium Dioxide, and Their Determination by ICP-AES

Direct determination of trace impurities in high purity neodymium after in-situ analyte-matrix separation by fluorination assisted ETV-ICP-AES

Determination of Trace Element Quantities in Ultra High-Purity Iron by Spectrochemical Analysis after Chemical Separation

Study on determination of impurities in tungsten concentrates with ICP-MS

Determination of Major and Trace Elements in Zirconium Alloys by ICP-AES