Abstract:Herein, a chelating sorbent that employs magnetic nanoparticles (MNPs) functionalized with 1,5-bis(di-2-pyridyl)methylene thiocarbohydrazide (DPTH-MNPs) has been used to develop a simple method for the analysis of trace amounts of metal ions present in environmental samples; the method combines on-line magnetic solid phase extraction (MSPE) with atomic spectrometry. Thus, a flow injection FI-MSPE/cold vapour generation system coupled to an inductively coupled plasma optical emission spectrometry (ICP OES) method for the determination of trace amounts of noble metals, platinum group elements (PGEs: Ir, Pd, Pt, Os, and Rh), and Au and Ag in environmental samples has been developed. A magnet-based reactor designed to contain DPTH-MNPs was placed in the injection valve of the FI manifold. Several chemical and flow variables were considered as factors in the optimization process using two central composite designs; with the optimized method, the experimental detection limits for simultaneous determination, calculated as the concentration of analyte giving signals equivalent to three times the standard deviation of the blank plus the net blank intensity (LOD, peak height), were 1.5 μg L−1, 0.03 μg L−1, 0.65 μg L−1, 0.62 μg L−1, 0.57 μg L−1, 0.03 μg L−1, and 100 μg L−1 for Pd, Ag, Os, Au, Ir, Pt, and Rh, respectively. The method offers relatively good precision (RSD 1.8–7.2%). The accuracy of the proposed method was verified using certified reference materials (CMRs, NIST 2557 autocatalyst, TMDA 54.4 fortified lake water, and SRM 1643e trace elements in fresh water) and by determining the analyte contents in spiked aqueous samples. Sea water and tap water samples obtained from Malaga (Spain) were also analysed. The determined values were in good agreement with the certified values, and the recoveries for the spiked samples were in the range of 91.8–108.1%. Additionally, the proposed method was applied in the simultaneous determination of the abovementioned 7 elements with a sample throughput of about 17 h−1, thereby reducing the time of analysis and the volumes of reagents and sample required.

ICP-AES determination of trace elements after preconcentrated with p-dimethylaminobenzaldehyde-modified nanometer SiO2 from sample solution

Simultaneous on-line preconcentration and determination of trace metals in environmental samples using a modified nanometer-sized alumina packed micro-column by flow injection combined with ICP-OES

Dispersive Liquid–Liquid Microextraction and Micro-Solid Phase Extraction for the Rapid Determination of Metals in Food and Environmental Waters

Simultaneous Measurements of Cr, Cd, Hg and Pb Species in Ng L-1 Levels by Interfacing High Performance Liquid Chromatography and Inductively Coupled Plasma Mass Spectrometry.

On-line separation and preconcentration of trace cadmium in environmental water samples by micro column filled with modified nanometer Si-HAP prior to FAAS determination

Sol-gel zirconia coating capillary microextraction on-line hyphenated with inductively coupled plasma mass spectrometry for the determination of Cr, Cu, Cd and Pb in biological samples

Silica Gel Modified with 1-(2-aminoethyl)-3-phenylurea for Selective Solid-Phase Extraction and Preconcentration of Sc(III) from Environmental Samples

Preparation of a high pH-resistant AAPTS-silica coating and its application to capillary microextraction (CME) of Cu, Zn, Ni, Hg and Cd from biological samples followed by on-line ICP-MS detection

Chemically Modified Activated Carbon With 1-Acylthiosemicarbazide For Selective Solid-Phase Extraction And Preconcentration Of Trace Cu(Ii), Hg(Ii) And Pb(Ii) From Water Samples

Amine functionalized polyacrylonitrile fibers for the selective preconcentration of trace metals prior to their on-line determination by ICP-MS

Simultaneous preconcentration of cadmium and lead in water samples with silica gel and determination by flame atomic absorption spectrometry.

Restricted accessed nanoparticles for direct magnetic solid phase extraction of trace metal ions from human fluids followed by inductively coupled plasma mass spectrometry detection

Ultrasound assisted dispersive solid phase microextraction of inorganic arsenic from food and water samples using CdS nanoflowers combined with ICP-OES determination

Separation and preconcentration system based on ultrasonic probe-assisted ionic liquid dispersive liquid-liquid microextraction for determination trace amount of chromium(VI) by electrothermal atomic absorption spectrometry

Preconcentration by coprecipitation of arsenic and tin in natural waters with a Ni-pyrrolidine dithiocarbamate complex and their direct determination by solid-sampling atomic-absorption spectrometry

Nanomagnetic material ferriferrous oxide separation/Enrichment and inductively coupled plasma-atomic emission spectrometry. for determination of arsenic

Chemically Modified Activated Carbon With S-Benzyldithiocarbazate As A New Solid-Phase Extractant For Preconcentration Of Mercury Prior To Icp-Aes Determination

Solid phase extraction and trace monitoring of cadmium ions in environmental water and food samples based on modified magnetic nanoporous silica

Determination of Pb and Cd in water sample by on-line ion-exchange preconcentration-FAAS

ICP-AES determination of aluminum fractions in complex environmental samples using calcon-modified anion exchange resin in SPE cartridge

Simultaneous determination of traces of Pt, Pd, Os, Ir, Rh, Ag and Au metals by magnetic SPE ICP OES and in situ chemical vapour generation