Abstract:In this work, a novel sol-gel coating of N-(2-aminoethyl)-3-aminopropyltrimethoxysilane (AAPTS)-silica was prepared for capillary microextraction (CME) of trace Cu, Zn, Ni, Hg and Cd followed by on-line ICP-MS detection. This organic-inorganic hybrid coating was in situ created on the inner walls of fused silica capillary using a sol solution containing tetramethoxysilane (TMOS) as a precursor, AAPTS as a co-precursor, ethanol as the solvent and cetyltrimethylammonium bromide (CTAB) as the template. The structure of the capillary coating was characterized by IR, SEM and TEM. Various experimental parameters affecting capillary microextraction of the target analytes have been investigated carefully, and the optimized extraction conditions were established. It was found that the AAPTS-silica coating with a terminal functional group of -NH-CH2-CH2-NH2 exhibited a high selectivity towards the selected metal ions. With a consumption of 1.0 mL sample solution and 80 microL eluent, the detection limits (3sigma) were found to be 1.8, 11.8, 1.1, 3.3 and 1.4 pg mL(-1) for Cu, Zn, Ni, Hg and Cd, respectively. A sampling frequency of 14 h(-1) and an enrichment factor of 12.5 were obtained under the optimized experimental conditions. The relative standard deviations (RSDs) for the target analytes were less than 3.6% (C = 1 ng mL(-1), n = 7, sample volume = 1 mL). Two certified reference materials of NIES No.10-c rice flour and BCR-CRM 278 mussel flesh were analyzed to validate the proposed method, and the determined values were in good agreement with the certified values. The developed method had also been applied to the determination of trace target elements in human hair, serum and urine, and the recoveries for the spiked samples were in the range of 89.2-101.8%. The AAPTS-silica coated capillary showed an excellent pH resistance and could be used for more than 120 times without decreasing adsorption efficiency.

Sol-gel zirconia coating capillary microextraction on-line hyphenated with inductively coupled plasma mass spectrometry for the determination of Cr, Cu, Cd and Pb in biological samples

A Novel Capillary Microextraction on Ordered Mesoporous Titania Coating Combined with Electrothermal Vaporization Inductively Coupled Plasma Mass Spectrometry for the Determination of V, Cr and Cu in Environmental and Biological Samples.

On-line Preconcentration and Separation of Co, Ni and Cd Via Capillary Microextraction on Ordered Mesoporous Alumina Coating and Determination by Inductively Plasma Mass Spectrometry (ICP-MS).

MPTS-silica coated capillary microextraction on line hyphenated with inductively coupled plasma atomic emission spectrometry for the determination of Cu, Hg and Pb in biological samples.

Simultaneous Measurements of Cr, Cd, Hg and Pb Species in Ng L-1 Levels by Interfacing High Performance Liquid Chromatography and Inductively Coupled Plasma Mass Spectrometry.

Preparation of a high pH-resistant AAPTS-silica coating and its application to capillary microextraction (CME) of Cu, Zn, Ni, Hg and Cd from biological samples followed by on-line ICP-MS detection

Ti-containing mesoporous silica packed microcolumn separation/preconcentration combined with inductively coupled plasma-mass spectrometry for the determination of trace Cr, Cu, Cd and Pb in environmental samples

Dispersive Liquid–Liquid Microextraction and Micro-Solid Phase Extraction for the Rapid Determination of Metals in Food and Environmental Waters

Study on solid phase extraction and graphite furnace atomic absorption spectrometry for the determination of nickel, silver, cobalt, copper, cadmium and lead with MCI GEL CHP 20Y as sorbent.

Chemically modified silica gel with p-dimethylaminobenzaldehyde for selective solid-phase extraction and preconcentration of Cr(III), Cu(II), Ni(II), Pb(II) and Zn(II) by ICP-OES

Aminopropyltriethoxysilane-silica hybrid monolithic capillary microextraction combined with inductively coupled plasma mass spectrometry for the determination of trace elements in biological samples.

Solid-phase Extraction of Trace Cu(II) Fe(III) and Zn(II) with Silica Gel Modified with Curcumin from Biological and Natural Water Samples by ICP-OES

Zincon-modified activated carbon for solid-phase extraction and preconcentration of trace lead and chromium from environmental samples.

Multi-Wall Carbon Nanotubes Chemically Modified Silica Microcolumn Preconcentration/Separation Combined With Inductively Coupled Plasma Optical Emission Spectrometry For The Determination Of Trace Elements In Environmental Waters

Nanometer-sized Zirconium Dioxide Microcolumn Separation/preconcentration of Trace Metals and Their Determination by ICP-OES in Environmental and Biological Samples

Simultaneous separation and speciation of inorganic As(III)/As(V) and Cr(III)/Cr(VI) in natural waters utilizing capillary microextraction on ordered mesoporous Al2O3 prior to their on-line determination by ICP-MS.

Zirconia-Coated Graphite Adsorption Bar Micro-Extraction Combined with Etv-Icp-Ms for the Determination of Trace Amounts of Cd, Hg and Pb in Environmental and Biological Samples

Dithizone modified magnetic nanoparticles for fast and selective solid phase extraction of trace elements in environmental and biological samples prior to their determination by ICP-OES.

Silica-Coated Magnetic Nanoparticles Modified with Gamma-Mercaptopropyltrimethoxysilane for Fast and Selective Solid Phase Extraction of Trace Amounts of Cd, Cuhg, and Pb in Environmental and Biological Samples Prior to Their Determination by Inductively Coupled Plasma Mass Spectrometry

Hollow-fiber Liquid-Phase Microextraction Prior to Low-Temperature Electrothermal Vaporization ICP-MS for Trace Element Analysis in Environmental and Biological Samples.

Ionic Liquids Based Single Drop Microextraction Combined with Electrothermal Vaporization Inductively Coupled Plasma Mass Spectrometry for Determination of Co, Hg and Pb in Biological and Environmental Samples