Abstract:When trace elements in an ultra high-purity iron were deter-mined, an analytical blank on a chemical analysis interfered with the determination of them. Similarly, the existence of major component in a sample interfered with the determination of trace elements. Therefore, in order to determine trace elements, it was examined that how to remove or decrease an analytical blank and how to separate trace elements from major component of a sample. For example, when C and S in an ultra high-purity iron were determined by combustion/infrared absorption method, an accelerator for combustion of an analytical sample contained C and S as blank. The accelerator consisted of a mixture of tungsten and tin. By heating it in ambient atmosphere, carbon blank was removed to be zero and sulfur blank was decreased to lower level. Consequently, when detection limit was defined as a value corresponding to 3 times of the standard deviation of blank value, it of carbon was infinitesimal and it of sulfur was 0.2 mug g(-1). Infinitesimal detection limit of carbon resulted from zero of the blank value of carbon. For that reason, detection limit.. of carbon that was minimum scale for carbon on the analytical instrument, because the standard deviation of carbon was read as 0.01 mug g(-1) of carbon that was minimum scale for carbon on the analytical instrument, because the standard deviation of the blank value could not to be calculated. Independently, in order to determine trace Sn, Ag and Au in a high-purity iron, these elements were separated from major component (iron) by co-precipitation. Metallic Pd was used as co-precipitant. Metallic Pd had been rarely used as co-precipitant. The elements were determined by electrothermal atomic absorption spectrometry (ET-AAS). When these elements were detected by ET-AAS, the Pd was available as chemical modifier. By the separation. content 0.002-0.02 mug g(-1) of the elements was determined.

Determination of As, Pb, Sn, Sb and Bi in High Temperature Iron and Nickel-Based Alloy by Graphite Furnace Atomic Absorption Spectrometry Combined with Liquid-Liquid Extraction

Determination of Elemental Impurities in Iron-Nickel-Based Superalloys by Glow Discharge Mass Spectrometry

Determination of trace nickel in Bi-based superconductor powder by inductively coupled plasma atomic emission spectroscopy after separation with anion exchange resin and extraction with methylbenzene

Matrix-assisted chemical modification determination of trace bismuth in nickel-based alloys by graphite furnace atomic Absorption spectrometry

In-situ Determination of Metallic Variation and Multi-Association in Single Particles by Combining Synchrotron Microprobe, Sequential Chemical Extraction and Multivariate Statistical Analysis.

Determination of Impurity Elements in High Purity Graphite by Inductively Coupled Plasma-Mass Spectrometry

Determination of Trace Element Quantities in Ultra High-Purity Iron by Spectrochemical Analysis after Chemical Separation

Atomic Absorption Determination of Lead, Bismuth, Selenium, Tellurium, Thallium and Tin in Complex Alloys Using Direct Atomization from Metal Chips in the Graphite Furnace

Determination of Cr, Ni, Cu, Mn, P, Si, Mo and Ti in high chromium cast iron by inductively coupled plasma atomic emission spectrometry

Study on the Determination of Impurities Elements of Sb, Cu,Sn,Si and P in Ferromolybenum by ICP-MS

Determination of Trace Amounts of Lead, Arsenic, Nickel and Cobalt in High-Purity Iron Oxide Pigment by Inductively Coupled Plasma Atomic Emission Spectrometry after Iron Matrix Removal with Extractant-Contained Resin.

Determination of Trace Amounts of Elements in High-Purity Iron Steels and Cr-Fe Alloy by Icp-Oes after Anion-Exchange Separation

Determination of trace elements in high purity nickel by high resolution inductively coupled plasma mass spectrometry

Systematic Study for Determining As, Pb, Cd, and Se in Steel and Nickel Alloy Samples by GF AAS: Circumventing Matrix Interference with Extraction Based on Micellar Separation

Successive Determination of Co、Fe、Cu、Ca、Mn、Zn、Mg and Pb in Nickel Powder by Standard Addition FAAS

Determination of tungsten,nickel,iron and vanadium in cobalt chromium tungsten alloy by inductively coupled plasma atomic emission spectrometry

Itemized determination of As, Sb, Bi, Se, and Ge in graphite sample by HG-AFS with high-temperature microwave digestion

Determination of Tin in Nickel-based Alloys by Electrothermal Laser-excited Atomic Fluorescence with Confirmation of Accuracy by Inductively Coupled Plasma Mass Spectrometry and Atomic Absorption Spectrometry

Determination of Sn, W, Ti and Other Elements in Polymetallic Ore by Inductively Coupled Plasma-Optical Emission Spectrometry with Sodium Peroxide Fusion

Determination of Ni,Al,P,Mg and Ca in Nickel Ores by Inductively Coupled Plasma-Atomic Emission Spectrometry

Determination of Trace Amounts of Nickel in Cobalt-Chromium-Molybdenum Alloys by Icp-Aes after Liquid-Liquid Extraction