Abstract:A novel simple electrothermal desolvation-enhanced dielectric barrier discharge plasma-induced vapor generation (ETD-DBD-PIVG) method has been developed for sensitive Sb determination by atomic fluorescence spectrometry (AFS). In our proposed ETD-DBD-PIVG, 20 μL sample solution was dried first; then, the resulting solution residue was directly converted into molecular volatile species efficiently through the interactions with hydrogen-doped DBD plasma; and finally, it was transported to AFS for detection. It was found that the desolvation process could greatly enhance Sb vapor generation, and the Sb fluorescence signal intensity is almost independent of its speciation, where comparable sensitivity is achieved for Sb(III) and Sb(V), enabling efficient total Sb detection without pre-reduction. Influencing parameters were evaluated in detail, including heating time, discharge gap, solution pH, and flow rates of argon and hydrogen, as well as coexisting ion interference. Under optimized conditions, the limit of detection was calculated as 0.86 μg L-1 (17.2 pg) for Sb. The accuracy of the proposed method was validated by the analysis of certified reference materials of simulated natural water samples and several river water samples. Compared with conventional hydride generation, the new ETD-DBD-PIVG offers an alternative green vapor generation technique with several advantages: (1) it eliminates the use of a sample flow system (e.g., no use of any syringe or peristaltic pump); instead, 20 μL of a sample is directly pipetted onto the glass plate for analysis; (2) it greatly simplifies the sample pretreatment steps as no pre-reduction process is needed; (3) it is sensitive and suitable for volume-limited sample analysis: efficient Sb vapor generation without chemical reducing reagents in ETD-DBD-PIVG enables Sb detection with an absolute limit at the picogram level. All the results demonstrate that the proposed method provides a simple, green, and sensitive method for Sb determination and it can also be extended to other elements such as Cd and As.

Determination of bismuth in river sediment by electrothermal atomic absorption spectrometry with low-temperature atomization in argon/hydrogen

Determination of Bismuth in Solid Samples by Hydride Generation Atomic Fluorescence Spectrometry with a Dielectric Barrier Discharge Atomizer

Determination of Bismuth in Sediment and Soil by Ultrasonic Slurry Sampling Electrothermal Atomic Absorption Spectrometry

Highly Sensitive and Interference-Free Determination of Bismuth in Environmental Samples by Electrothermal Vaporization Atomic Fluorescence Spectrometry after Hydride Trapping on Iridium-Coated Tungsten Coil

Determination of bismuth in cod muscle, lake and river sediment by flow injection on-line sorption preconcentration in a knotted reactor coupled with electrothermal atomic absorption spectrometry

Determination of antimony in water samples by hydride generation coupled with atmospheric pressure glow discharge atomic emission spectrometry

Simple and rapid method for the determination of trace bismuth in sulfur samples by hydride generation atomic fluorescence spectrometry with microwave digestion

Slurry Sampling Thermospray Flame Furnace Atomic Absorption Spectrometric Determination of Bismuth in Water and Geological Samples Combined with Ultrasound-Assisted Dispersive Micro Solid Phase Extraction

Determination of trace bismuth by using a portable spectrometer after ultrasound-assisted dispersive liquid–liquid microextraction

Simultaneous determination of arsenic and antimony by hydride generation atomic fluorescence spectrometry with dielectric barrier discharge atomizer

Matrix-assisted chemical modification determination of trace bismuth in nickel-based alloys by graphite furnace atomic Absorption spectrometry

Adsorption on UiO-66 for preconcentration, matrix separation, slurry sampling and in situ hydride generation-atomic fluorescence spectrometric determination of trace bismuth in alloy and water

Determination of Antimony by Bianode Electrochemical Hydride Generation-Atomic Fluorescence Spectrometry

High Sensitivity Determination of Antimony with Application for the Characterization of Its Migration in Bottled Water by a Dielectric Barrier Discharge (DBD) Coupled with Hydride Generation – Atomic Fluorescence Spectrometry (HG-AFS)

Electrothermal Desolvation-Enhanced Dielectric Barrier Discharge Plasma-Induced Vapor Generation for Sensitive Determination of Antimony by Atomic Fluorescence Spectrometry

Determination of Trace Mercury in Geological Samples by Direct Slurry Sampling Cold Vapor Generation Atomic Absorption Spectrometry

Determination of arsenic and antimony by atmospheric pressure glow discharge portable emission spectrometer with solid acid hydride generation

Direct and Sensitive Determination of Antimony in Water by Hydrogen-Doped Solution Anode Glow Discharge-Optical Emission Spectrometry Without Hydride Generation

A new supramolecular based liquid solid microextraction method for preconcentration and determination of trace bismuth in human blood serum and hair samples by electrothermal atomic absorption spectrometry

Determination of Trace Amounts of Boron by Microwave Plasma Torch Atomic Emission Spectrometry Using an On-Line Separation and Preconcentration Technique

Determination of Trace Antimony (III) in Water Samples with Single Drop Microextraction Using BPHA-[C4mim][PF6] System Followed by Graphite Furnace Atomic Absorption Spectrometry.