Abstract:A study was undertaken to investigate the effects of small boron additions on the solidification and microstructure of hypo-eutectic alloyed grey cast iron. The characteristic temperatures upon crystallisation of the treated metal melt were recorded, specifically those concerning small boron addition by using thermal analysis with the ATAS system. Additionally, a standardised wedge test was set to observe any changes in chill performance. The microstructures of thermal analysis samples were analysed using a light optical microscope (LOM) and field emission scanning electron microscopy (FE-SEM) equipped with energy dispersive spectroscopy (EDS), which reveal variations in graphite count number with the addition of boron within observed random and undercooled flake graphite. The effect of boron was estimated by the classical analytical and statistical approach. The solidification behaviour under equilibrium conditions was predicted by a thermodynamic approach using Thermo-Calc. Based on all gathered data, a response model was set with boron for given melt quality and melt treatment using the experimentally determined data. The study reveals that boron as a ferrite and carbide-promoting element under the experimental set shows weak nucleation potential in synergy with other heterogenic nuclei at increased solidification rates, but no considerable changes were observed by the TA samples solidified at slower cooling rates, indicating the loss of the overall inoculation effect. The potential presence of boron nitride as an inoculator for graphite precipitation for a given melt composition and melt treatment was not confirmed in this study. It seems that boron at increased solidification rates can contribute to overall inoculation, but at slower cooling rates these effects are gradually lost. In the last solidification range, an increased boron content could have a carbide forming nature, as is usually expected. The study suggests that boron in traces could affect the microstructure and properties of hypo-eutectic alloyed grey cast iron.

Scanning Auger Microprobe Study of Interfacial Adsorption Behaviour of Some Minor Elements in Spheroidal-graphite Cast Iron

High-Resolution Electron Microscope Observation of Interface Microstructure of A Cast Al-Mg-Si-Bi-Pb(6262)/Al2o3p Composite

Wetting and Spreading Behavior of Molten Iron in Contact with Graphite Substrate: Interfacial Effects

Influence of Inoculation on the Mass Effect in Heavy Section Ferritic Spheroidal Graphite Cast Iron

Microstructure and Properties Variation of High-Performance Grey Cast Iron via Small Boron Additions

Effect of Sb–Ba–Ce–Si–Fe Post Inoculants on Microstructural and Mechanical Properties of As‐Cast Pearlitic Ductile Iron

The Effect of Boron (B) and Copper (Cu) on the Microstructure and Graphite Morphology of Spheroidal Graphite Cast Iron

Shrinkage Behaviour of Spheroidal Graphite Cast Iron in Green and Dry Sand Molds for the Benchmarking of Solidification Simulation

Effect of Sb on the Graphite Morphology and Mechanical Properties in Heavy Section Ductile Iron

Effects of Inoculation on the Pearlitic Gray Cast Iron with High Thermal Conductivity and Tensile Strength

Effect of Purifying Agent on the Microstructure and Mechanical Properties of Nodular Graphite Cast Iron

Theory and practice of inoculation for high-grade gray cast iron railway castin

Effects of Manganese and Heat Treatment on Mechanical Properties in Spheroidal Graphite Cast Iron

Impact of carbide-promoting elements on the mechanical properties of solid-solution-strengthened ductile iron

The Effects of MgFeSi and Inoculant Selection on Microstructure and Mechanical Properties of Varying Section Size Ductile Iron Castings

Effect of Chromium on Microstructure and Properties of High Boron White Cast Iron

Effect of Nb Addition on Compact Microstructure and Mechanical Properties of Gray Cast Iron for Cylinder Liner

Surface structure and morphology evolution of iron borides under dynamic conditions: A theoretical study

Examining the role of rare earth elements on grey iron's microstructural and mechanical properties

Modeling of Stable and Metastable Eutectic Transformation of Spheroidal Graphite Iron Casting.

Microstructure and Mechanical Properties of High Boron White Cast Iron with about 4 Wt% Chromium