Abstract:Ductile iron contains free graphite nodules inside the metallic matrix, which generally consists of ferrite and pearlite in the as-cast condition. The casting thicknesses greatly influence on the size, shape, and quantity of the microconstituents of the metallic matrix and the graphite nodules and, therefore, on the mechanical properties. This investigation studied the cooling rate (imposed by the casting thicknesses) on the metallic matrix and the nodular characteristics of a ductile iron low alloyed with 0.8 %Ni and 0.15 %V. The ductile iron was manufactured by the sandwich technique with ladle inoculation. Six plates of different thicknesses, from 4.3 mm to 25.4 mm, were fabricated in a green sand mold. The microstructural characterization was performed by optical microscopy (OM), scanning electron microscopy (SEM), and the image J software by applying different quantification methods. The area method to obtain the average nodule size and nodularity provided more reliable results than the perimeter and total particle count methods. The hardness test on the Rockwell C scale carried out the mechanical characterization. The low content of vanadium added to the ductile cast iron had a negligible effect on the solidification pattern, mainly due to the graphitizing impact of the nickel and silicon addition. Thus, the microstructural features results are primarily due to the cooling rate imposed by the casting thickness. The thinnest casting section significantly improves the nodule count (414 Nod/mm2), sphericity (0.96), and nodularity (96.21 %). In contrast, the thickest casting plate obtained the highest volume fraction of graphite (10.85 %) and the lowest volume fraction of undesirable particles (0.36 %). The high cooling rate in the thinnest casting plate obtained the highest hardness of 31.56 HRC because of the higher contents of the volume fraction of pearlite (33.7 %) and carbides (4.5 %).

Effect of Purifying Agent on the Microstructure and Mechanical Properties of Nodular Graphite Cast Iron

Effect of N on the Precipitation Behaviours of the Reduced Activation Ferritic/martensitic Steel CLF-1 after Thermal Ageing

Effect of Microstructure Before Nitrogenation on Magnetic Properties of SmFeN Alloys

Effects of graphite nodule count on mechanical properties and thermal conductivity of ductile iron

The effect of niobium addition on the microstructure and properties of cast iron used in cylinder head

Effect of Nb Addition on Compact Microstructure and Mechanical Properties of Gray Cast Iron for Cylinder Liner

Effect of regular thicknesses on the microstructural and quantitative analysis for a hypo-eutectic ductile iron alloyed with Ni and V

Effect of Manganese on Microstructure and Properties of Cast Iron

Effects of Manganese and Heat Treatment on Mechanical Properties in Spheroidal Graphite Cast Iron

Effects of Inoculation on the Pearlitic Gray Cast Iron with High Thermal Conductivity and Tensile Strength

Effects of Purification on the Properties and Microstructures of Natural Flake and Artificial Graphite Powders

Mechanism Analysis for the Enhancement of Low-Temperature Impact Toughness of Nodular Cast Iron by Heat Treatment

Characterization of Microstructure and Mechanical Properties of High Chromium Cast Irons Using Sem and Nanoindentation

Influence of Cu on Properties of High Strength Ductile Cast Iron

Influences of Dual-Phased Nanoparticles on Microstructure, Mechanical Properties and Wear Resistance of Vermicular Graphite Cast Iron

Effect of Silicon and Vanadium on the Composition of Carbide Phase in Mottled Medium-Alloy Chromium-Nickel Cast Iron

Effect of cyclic quenching treatment on microstructural evolution and properties of ductile cast iron

Inoculant for refining gray cast iron texture and preparation method and application thereof

Effect of Niobium Modification on Solidification and Crystallization Mechanism of Medium-Carbon Cast Steel

Effects of Titanium, Cerium or Aluminum Addition on Microstructure and Mechanical Properties of Ductile Iron Castings

Effect of Sb–Ba–Ce–Si–Fe Post Inoculants on Microstructural and Mechanical Properties of As‐Cast Pearlitic Ductile Iron