Abstract:Ductile iron contains free graphite nodules inside the metallic matrix, which generally consists of ferrite and pearlite in the as-cast condition. The casting thicknesses greatly influence on the size, shape, and quantity of the microconstituents of the metallic matrix and the graphite nodules and, therefore, on the mechanical properties. This investigation studied the cooling rate (imposed by the casting thicknesses) on the metallic matrix and the nodular characteristics of a ductile iron low alloyed with 0.8 %Ni and 0.15 %V. The ductile iron was manufactured by the sandwich technique with ladle inoculation. Six plates of different thicknesses, from 4.3 mm to 25.4 mm, were fabricated in a green sand mold. The microstructural characterization was performed by optical microscopy (OM), scanning electron microscopy (SEM), and the image J software by applying different quantification methods. The area method to obtain the average nodule size and nodularity provided more reliable results than the perimeter and total particle count methods. The hardness test on the Rockwell C scale carried out the mechanical characterization. The low content of vanadium added to the ductile cast iron had a negligible effect on the solidification pattern, mainly due to the graphitizing impact of the nickel and silicon addition. Thus, the microstructural features results are primarily due to the cooling rate imposed by the casting thickness. The thinnest casting section significantly improves the nodule count (414 Nod/mm2), sphericity (0.96), and nodularity (96.21 %). In contrast, the thickest casting plate obtained the highest volume fraction of graphite (10.85 %) and the lowest volume fraction of undesirable particles (0.36 %). The high cooling rate in the thinnest casting plate obtained the highest hardness of 31.56 HRC because of the higher contents of the volume fraction of pearlite (33.7 %) and carbides (4.5 %).

Effects of graphite nodule count on mechanical properties and thermal conductivity of ductile iron

Effect of N on the Precipitation Behaviours of the Reduced Activation Ferritic/martensitic Steel CLF-1 after Thermal Ageing

Effects of Mo and Ni on the Thermal Conductivity of Compacted Graphite Iron at Elevated Temperature

The Direct and Indirect Effects of Nanotwin Volume Fraction on the Strength and Ductility of Coarse-Grained Metals

Effects of Graphite Nanosheet Size on Thermal Storage Property of Composite PCMs

Effects of Alloy Elements on Ductility and Thermal Conductivity of Compacted Graphite Iron

Effect of regular thicknesses on the microstructural and quantitative analysis for a hypo-eutectic ductile iron alloyed with Ni and V

The Influence Of Cast Structure On The Austempering Of Ductile Iron. Part 3. The Role Of Nodule Count On The Kinetics, Microstructure And Mechanical Properties Of Austempered Mn Alloyed Ductile Iron

Effect of Purifying Agent on the Microstructure and Mechanical Properties of Nodular Graphite Cast Iron

Graphite Nodularity Evaluation in High-Si Ductile Cast Irons

Effects of Inoculation on the Pearlitic Gray Cast Iron with High Thermal Conductivity and Tensile Strength

Tomographical Study Of The Effect Of Graphite On Properties Of Cast Iron

Microstructure and rolling contact fatigue behavior of martensitic nodular cast irons with different graphite sizes and densities

Development of New Ductile Iron with Super-High Thermal Conductivity and Elongation

Fuzzy Neural Network Analysis on the Compacted Graphite Iron with Improved Tensile and Heat Transport Properties

Effects of Microstructure on the Temperature Dependence of Relative Initial Permeability of NiCuZn Ferrites

Effect of Cerium Addition on Microstructure and Mechanical Properties of the Ductile Iron

Effect of Sb on the Graphite Morphology and Mechanical Properties in Heavy Section Ductile Iron

Fuzzy Neural Network Analysis on Gray Cast Iron with High Tensile Strength and Thermal Conductivity

The Effects of Morphology and Temperature on the Tensile Characteristics of Carbon Nitride Nanothreads.

Mechanical and tribological behavior of dual-phase ductile iron with different martensite amounts