Abstract:M50 bearing steel designed for aerospace applications exhibits unique microstructural alterations at the subsurface during rolling contact fatigue (RCF). In this work, three types of microstructural alterations, light etching region (LER), white etching band (WEB) and white etching area (WEA) are systematically studied. A hardness profile at the subsurface is obtained by microindentation with material softening being detected. It is found that the material softening is associated with the formation of WEBs. The microstructural nature of the three types of microstructural alterations is revealed by detailed characterisation using focused ion beam milling and transmission electron microscopy. It is found that LERs, WEBs and WEAs are a manifestation of the decay of the parent martensite and all consist of dislocation cells or fine grains, indicative of plastic deformation. Through subsurface stress field analysis, LER, WEBs and WEAs are found to be caused by different stress components. The similarities and differences of the microstructural alterations in M50 and in widely studied 100Cr6 are discussed where the stability of carbides is believed to play a key role. The difference in material response in the microstructural alterations in M50 is further analysed and modelled based on Kocks and Mecking theory, with different types of activated dislocation slip systems found to be the root cause for such difference. Based on the material response analysis for WEBs, a material softening model for M50 during RCF is established by considering residual plastic strain accumulation, yielding prediction results in agreement with experimental measurement.

Microstructure and rolling contact fatigue behavior of martensitic nodular cast irons with different graphite sizes and densities

Influences of Partial Substitution of C by N on the Microstructure and Mechanical Properties of 9cr18mo Martensitic Stainless Steel

Microstructure evolution and mechanical properties of martensitic stainless bearing steels with different carbon nitrogen ratios

Microstructural evolution and performance change of a carburized nanostructured bainitic bearing steel during rolling contact fatigue process

Rolling Contact Fatigue Failure Mechanism of Martensitic Bearing Steel after Carbonitriding

The origin of microstructural alterations in M50 bearing steel undergoing rolling contact fatigue

Effects of carburizing and nitriding sequential treatment on rolling contact fatigue of M50NiL bearing steel

Rolling Contact Fatigue Performances Of Carburized And High-C Nanostructured Bainitic Steels

Investigating Microstructural Evolution and Its Influence on Tribological Behaviors of In-Situ Formed VCp Reinforced Iron-Based Composites with Variable Mn Content

Rolling contact fatigue studies on AISI 4140 steel under formulated lubrication conditions with nano graphene additives

A novel microstructure of carbide-free bainitic medium carbon steel observed during rolling contact fatigue

Graphite Morphology and Performance of Cr-Mo-Cu Alloy Cast Iron Modified by Nano Additives

Microstructure and water-lubricated friction and wear properties of CrN(C) coatings with different carbon contents

Microstructural-based analysis of the unexpected differences in rolling contact fatigue behavior between SAE52100 and SAE4320

Rolling Contact Fatigue Behaviors of High Carbon Bainitic Bearing Steel

Influences of Micro Mechanical Property and Microstructure on Performance of Machining High Chromium White Cast Iron with Cbn Tools

Microstructure Evolution and Wear Characterization of Cnts/Al-Cu-Mg-Si Nanocomposites Manufactured Using Semi-Solid Stir Casting

The effect of retained austenite on rolling/sliding contact fatigue of high carbon steel

Effect of (nbti)c Particles on the Microstructure and Hardness of High Chromium and Nickel Indefinite Chilled Cast Iron

Fatigue and recrystallization evolution of carbide-free bainitic layer under high-stress rolling sliding contact