Abstract:Compacted graphite iron (CGI), a prototypical heterogeneous material, potentially demonstrates distinctive cutting deformation behaviours attributed to the random distribution of graphite and performance differences between graphite and the matrix, which have not yet received adequate attention. This study focuses on the influence of the microstructure characteristics of CGI on the formation of serrated chips. The morphology of the serrated chip segments during the orthogonal turning of CGI was observed in detail, the microstructures of the chip roots were characterised and analysed using various techniques, and a finite-element cutting simulation model considering the microstructural characteristics of CGI was developed. Results suggest that the formation of serrated chips in CGI is influenced by periodic and aperiodic brittle fractures, referred to as quasi-periodic brittle fractures, which are controlled by the distribution of graphite in CGI. This results in variations in the morphology and dimensions of the serrated chips in CGI. Plastic deformation is concentrated in a triangular deformation zone (TDZ) near the tool-chip interface, which is broader than the conventional secondary deformation zone. The experimental and simulation results revealed the reasons for the formation of the TDZ and emphasized the critical role of graphite in the formation of serrated chips in CGI. The graphite particles near the tool-chip interface promoted plastic deformation along the interface owing to the principle of minimum energy and restricted deformation perpendicular to the interface due to its structure, leading to the formation of the TDZ. The influence of graphite on material flow and the formation of the TDZ during the formation of serrated chips in CGI is a novel discovery. The microstructure evolution of the pearlite matrix in CGI caused by cutting deformation was analysed. The results demonstrate that the distinctive deformation behaviour of CGI contributes to the fragmentation of the pearlite structure, grain refinement, and increased dislocation density in the TDZ. Finally, the influence of the serrated chip formation mechanism on chip morphology and cutting force in CGI was discussed. These findings offer significant scientific insights and contribute to the fundamental understanding of the chip formation process in CGI.

A study investigating the cutting mechanism of compacted graphite iron based on a novel microstructure of finite element model

Finite Element Simulation Of High-Speed Cutting Alloy Cast Iron

Simulation of Chip Formation in High-Speed Hard Machining

The Finite Element Analysis Of Serrated Chip Formation In High-Speed Cuffing Auto Panel Dies

Finite Element Simulation of Serrated Chip Formation in High-speed Milling of A lloy Cast Iron

Influence of Distribution and Size of Graphite Particle on the Machinability of Nodular Cast Iron

Finite Element Modelling and Experimental Validation of the Graphite Cutting Process

Mechanisms and FEM Simulation of Chip Formation in Orthogonal Cutting In-Situ TiB2/7050Al MMC

Numerical study of microstructural effects on chip formation in high speed cutting of ductile iron with discrete element method

Study On Chip Formation And Simulation Of Cutting In-Situ Tib2 Particle Reinforced 7050al Metal Matrix Composites

Fuzzy Neural Network Analysis on the Compacted Graphite Iron with Improved Tensile and Heat Transport Properties

A chip formation mechanism taking into account microstructure evolution during the cutting process: Taking compacted graphite iron machining as an example

Cutting of Graphite at Atomic and Close-to-Atomic Scale Using Flexible Enhanced Molecular Dynamics

Mechanism of Material Removal During Orthogonal Cutting of Graphite/polymer Composites

Experimental and FEM Study of Coated and Uncoated Tools Used for Dry Milling of Compacted Graphite Cast Iron

Finite Element Simulation and Experiment of Chip Formation During High Speed Cutting of Hardened Steel

Crack Initiation in Compacted Graphite Iron with Random Microstructure: Effect of Volume Fraction and Distribution of Particles

Investigation of Material Properties Based on 3D Graphite Morphology for Compacted Graphite Iron

Study of Silicon Carbide Dissociation into Fe and Fe C Matrixes Produced by Die Pressing and Sintering

Modeling and Optimization of High-Grade Compacted Graphite Iron Milling Force and Surface Roughness Via Response Surface Methodology

Investigation on Cutting Mechanism of SiCp/Al Composites in Precision Turning