Abstract:To introduce a paramagnetic intergranular phase into the ThMn12-type permanent materials, SmFe12-based alloys with the composition of SmxZr0.2(Fe0.8Co0.2)(11.5)Ti-0.5 (x = 0.8-1.4, at.%) are designed and prepared by arc-melting and melt-spinning. Roles of extra Sm on the phase constitution and magnetic properties are systematically investigated. First of all, within the range of x = 0.8-1.2, the as-cast ingots mainly constitute of 1:12, 1:10, 1:2 and alpha-(Fe,Co) phase. With increasing Sm content, both 1:12 and alpha-(Fe,Co) phases decrease whereas 1:2 and 1:10 phases increase. Similarly, for the heat-treated ribbons with x = 0.8-1.2, alpha-(Fe,Co) phase also decreases with the increasing Sm content. Consequently, the J(s) and J(r) of the alloys exhibit a decreasing trend while the H-c and (BH)(max) show an increasing trend. As a result, excellent magnetic properties of J(r) = 1.04 T for x = 0.8 alloy, (BH)(max) = 61 kJ/m(3) and H-c = 3.0 kOe for x = 1.2 alloys are acquired. Henkel curves of the annealed ribbons prove the existence of an exchange coupling effect in all alloys, which has contributed to the remanence enhancement. Interestingly, the observed kink in the demagnetization curve of x = 1.2 annealed alloy suggests the ineffective exchange coupling between soft and hard grains. An amorphous grain boundary phase is observed in the annealed x = 1.2 alloy while the refined Fe-57 Mossbauer spectrum confirms its paramagnetic behavior. The present work may provide a dependable guideline for designing the composition and microstructure of 1:12-based permanent material. (c) 2020 Elsevier B.V. All rights reserved.

Effect of Microstructure Before Nitrogenation on Magnetic Properties of SmFeN Alloys

Effects of Ambient Gasses on the Magnetic Properties of Fe84.8Zr3.4Nb3.4B7.4Cu1 Nanocrystalline Alloy

Effect of Annealing on the Microstructure and Magnetic Properties of Fe-based Nanocomposite Materials

Effect of Nitrogen Content in Magnetic Properties of Sm/sub 2/fe/sub 17/n/sub X/ and SmFe/sub 5/n/sub Y/ Alloys

Effect Of Nitrogen-Content On Magnetic-Properties Of Sm2fe17nx And Smfe5ny Alloys

Effect of Nb content on Sm2Fe17−xNbx and its nitrides prepared by reduction-diffusion method

Effect of Niobium on Microstructure and Magnetic Properties of Bulk Anisotropic NdFeB/α-Fe Nanocomposites

Effect of Nd Content on Magnetic Properties and Microstructure of Nd_xFe_(90.5-x)Zr_(3.0)B_(6.5_)Nanocomposite Magnets with the Big Zr Content

Nitrogenation Effect of Sm2Fe17 Alloys Prepared by Strip Casting Technique

Effects of Nitrogen Addition on the Microstructures and Soft Magnetic Properties of Nanocrystalline Fe86zr7b6cu1 Ribbons

Study on Crystallization Behavior and Microstructure of Melt-Spun Nd2(Fe,Nb)14B/α-Fe Alloys

Fe content influence on the microstructure of solution-treated Sm-Co-Fe-Cu-Zr alloys

Effects of heat treating atmosphere on the phase composition and magnetic properties of Nd10Fe79Zr1Co4B6 alloy

Effect of Nb and Zr additions on the crystallization behaviors and magnetic properties of nano composite (Nd,Pr)(2)Fe14B/a-Fe magnets

Effects of Nb and Zr additions on crystallization behavior, microstructure and magnetic properties of melt-spun (Nd,Pr)2Fe14B/α-Fe alloys

Phase transformation mechanism and magnetic properties of Sm-Fe alloys produced by melt-spinning and high-energy ball milling

Effect of post-sintering annealing on microstructure and coercivity of Al85Cu15-added NdFeB sintered magnets

Microstructure and Magnetic Properties in Mn-doped Nd–Fe–B Magnets

Effect Of Interstitial Nitrogen On The Structural And Magnetic Properties Of Ndfe10.5v1.5nx

Effect of microstructure on magnetic properties of Nd-Fe-B permanent magnet

Effects of Sm Content on the Phase Structure, Microstructure and Magnetic Properties of the Sm Zr0.2(Fe0·8Co0.2)11.5Ti0.5 (x=0.8–1.4) Alloys