Abstract:Background: Platinum (Pt), palladium (Pd), rhodium (Rh) and iridium (Ir) are platinum group elements (PGEs) and also important elements of geochemistry and environmental chemistry with the similar physic-chemical properties, which have been widely used in industry and laboratory. However, due to the low abundance and inhomogeneous distribution in natural ore as well as the nugget effect, the accurate determination of PGEs has been a challenge to analytical chemistry. Methods: In this work, a novel fire assay method was reported for the determination of ultra-trace Pt, Pd, Rh and Ir in geochemical samples. Tin powder (Sn) instead of stannic oxide (SnO 2 ) was used as a fire assay collector to reduce the melting temperature from 1250°C to 1050°C, the escape of molten material caused by high temperature was successfully avoided. Tin bead was compressed into thin slice and dissolved by HCl. For the target Pt, Pd, Rh and Ir, HCl insoluble substance such as PtSn 4 , PdSn 4 , RhSn 4 and Ir 3 Sn 7 were formed and separated from matrix by filtering. The metal compounds precipitate together with filter paper were microwave-assisted completely digested by aqua regia (50%, v/v), thence the sample solution was determined by inductively coupled plasma mass spectrometry (ICP-MS). Results: Compared with nickel oxide and lead oxide in nickel sulfide /lead fire assay, the reagent blank of tin powder were relatively low and could be directly employed in tin fire assay to collect Pt, Pd, Rh and Ir without purifying. Moreover, the harm of nickel oxide and lead oxide to the analyst and environment was avoided by using the non-toxic tin powder. The decomposition method of chromite and black shale was investigated as well as the amount of tin powder and flour, microwave digestion program for the determination of Pt, Pd, Rh and Ir were optimized. Besides, the influence of mass spectrum interference of co-existing elements was discussed and the standard mode and kinetic energy discrimination collision pool mode were compared. Under the optimal conditions, excellent curve fitting of Pt, Pd, Rh and Ir were obtained between 0.01~100 ng mL -1 , with the correlation coefficients exceeding 0.9996. The detection limits were from 0.003 ng g -1 to 0.057 ng g -1 . Conclusion: The developed method was applied to analyze the Chinese Certified Reference Materials and the determined values were in good agreement with the certified values.

Simultaneous determination of 5 elements in chrome iron ore samples by inductively coupled plasma-opti-cal emission spectrometry

ICP-AES Determination of 5 Chemical Components in Chromium Ores

Determination of Sn, W, Ti and Other Elements in Polymetallic Ore by Inductively Coupled Plasma-Optical Emission Spectrometry with Sodium Peroxide Fusion

Development of ICP-AES Method for Analysis of Iron Ore Raw Materials

Simultaneous Determination of 50 Elements in Geological Samples by ICP-MS Combined with ICP-OES

Determination of Trace Amounts of Lead, Arsenic, Nickel and Cobalt in High-Purity Iron Oxide Pigment by Inductively Coupled Plasma Atomic Emission Spectrometry after Iron Matrix Removal with Extractant-Contained Resin.

Determination of tungsten,nickel,iron and vanadium in cobalt chromium tungsten alloy by inductively coupled plasma atomic emission spectrometry

Determination of Ni,Al,P,Mg and Ca in Nickel Ores by Inductively Coupled Plasma-Atomic Emission Spectrometry

Determination of Cr, Ni, Cu, Mn, P, Si, Mo and Ti in high chromium cast iron by inductively coupled plasma atomic emission spectrometry

Simultaneous Determination of 15 Elements in Sedimentary Rock Samples by Inductively Coupled Plasma-Atomic Emission Spectrometry

Determination of Trace Amounts of Elements in High-Purity Iron Steels and Cr-Fe Alloy by Icp-Oes after Anion-Exchange Separation

Simultaneous Determination of Fe,Ni,Cu,V and Pb in Hydrocracking Catalyst by ICP-AES

Direct determination of trace elements in austenitic stainless steel samples by ETV-ICPOES

Multi-Element Determination in Chalcopyrite by Inductively Coupled Plasma Atomic Emission Spectrometry

Simultaneous Determination of Arsenic, Antimony and Bismuth in Chemical Materials by Inductively Coupled Plasma Optical Emission Spectrometry

Analysis of iron ores by ICP-AES

Determination of fourteen elements in iron oxide by microwave digestion inductively coupled plasma atomic emission spectrometry

On-line Electrolytic Dissolution of Alloys and Multi-Element Determination by Inductively Coupled Plasma Atomic Emission Spectrometry

Simultaneous Determination of Ultra-trace Pt, Pd, Rh and Ir in Geochemical Samples by Inductively Coupled Plasma Mass Spectrometry Following Tin Fire Assay Preconcentration and Microwave Digestion

Determination of Ultra-Trace Platinum, Palladium, Ruthenium, Rhodium, and Iridium in Rocks and Minerals by Inductively Coupled–Plasma Mass Spectrometry Following Nickel Sulfide Fire Assay Preconcentration and Open Mixed Acid Digestion

Study on determination of multi elements in galena by inductively coupled plasma atomic emission spectrometry