Abstract:The Ti content in zircon M257 was determined in-situ by LA-ICP-MS using Si and Zr as internal standards and NIST 610,GSE-1G,BHVO-2G,BCR-2G,ATHO-G,KL2-G and T1-G as external standards.The large difference between measured and referred values by using BCR-2G,ATHO-G,KL2-G and T1-G as external standards and Si or Zr as internal standard indicated that the four NIST standard materials were not suitable for external materials.Whether using Si as internal and BHVO-2G as external standards,or Zr as internal and NIST 610 as external standards,the difference between measured and referred values was less than 4%,which means that the two standard materials can be used as external standards selectively.Using GSE-1G as the external standard,whether Zr or Si is used as the internal standard,the difference between measured and referred values is less than 3%,which indicates that GSE-1G is a better external standard material.The Ti contents in 5 zircon standards were measured by using Si as internal and GSE-1G as external standards.The Ti distributions were heterogeneous in 91500 and homogeneous in GJ-1,M257,PENGLAI and MUDTANK.However,the Ti contents in the zircon standards of GJ-1,M257,PENGLAI and MUDTANK were less than 5 μg/g.Therefore all 5 zircon standards can not be used as external materials because of heterogeneity or lower Ti content,which can only be used as quality control materials in determination of Ti in zircons,except for 91500.

Determination of Major and Trace Elements in Zirconium Alloys by ICP-AES

A direct solid sampling electrothermal atomic absorption spectrometric method for determination of trace elements in zirconium dioxide

Determination of Trace Phosphorus in Cobalt-Niobium-zirconium Alloy by Inductively Coupled Plasma Atomic Emission Spectrometry

Determination of Rare Earth Impurities in High Purity Zirconium Dioxide by Electrothermal Vaporization Inductively Coupled Plasma Atomic Emission Spectrometry Using 1-Phenyl-3-methyl-4-benzoyl-5-pyrazone As Extractant and Chemical Modifier

Determination of trace europium in zirconium dioxide by electrothermal vaporization inductively coupled plasma-atomic emission spectrometry with 1-phenyl-3-methyl-4-benzoyl-pyrazone[5] as extractant and chemical modifier

In-situ Electrothermal Fluorination-Assisted Matrix Removal, Slurry Sampling, Graphite Furnace Atomic Absorption Spectrometry for the Determination of Trace-Level Chromium, Cobalt and Vanadium in Zirconium Dioxide Powder

Determination of impurity elements in tungsten concentrates by ICP-MS

Development of analytical method for zirconium determination in U–Pu–Zr alloy samples

Study on determination of impurities in tungsten concentrates with ICP-MS

Accurate Determination of Ti in Zircon by Laser Ablation-Inductively Coupled Plasma-Mass Spectrometry

Determination of Trace Amounts of Elements in High-Purity Iron Steels and Cr-Fe Alloy by Icp-Oes after Anion-Exchange Separation

Trace Determination Of Zirconium(Iv) By Anodic Adsorptive Voltammetry At A Carbon Paste Electrode

Determination of tungsten,nickel,iron and vanadium in cobalt chromium tungsten alloy by inductively coupled plasma atomic emission spectrometry

Direct Determination of Trace Elements in Micro Amounts of Biological Samples Using Electrothermal Vaporization Coupled to Icp-Aes

A Novel Catalytic Procedure for the Determination of Ultratrace Zirconium

Determination of 13 Trace Impurities in High-Purity Tantalum Pentoxide by ICP-AES

ICP-AES Determination of 5 Chemical Components in Chromium Ores

Determination of Impurity Elements in High-Purity Niobium Pentoxide by ICP-AES

Determination of Trace Metal Impurities in Solar Grade Polysilicon by ICP-MS

Enrichment of trace scandium with microcrystalline naphthalene and subsequent ICP-AES determination

The Method of Determination Nine Kinds Elements in Sphalerite by ICP-AES